EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Event-Camera-Based Defect Detection of High-Speed Rotating Propellers

Yosuke Ishikawa iD, Kenji Iwata iD, Yutaka Satoh iD

Sensors · 25.07.2026 · 26 (15) · 4721

DOI: 10.3390/s26154721 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 25.07.2026. Verfasst von Yosuke Ishikawa und 2 weiteren Autor:innen. Beteiligte Einrichtung: National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8560, Japan. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Institute of Advanced Industrial Science and Technology, AIST policy-based budget project “R&D on Generative AI Foundation Models for the Physical Domain”.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Defect detection in rotating propellers is critical because small defects can cause performance degradation, vibration, noise, and safety risks. Conventional frame-based cameras suffer from motion blur, whereas high-speed cameras often require costly equipment and controlled conditions. This study investigates an event-camera-based sensing framework that converts asynchronous luminance changes from high-speed rotating propellers into positive–negative (PN) composite event accumulation images and classifies normal and defective propellers using a convolutional neural network (CNN). Gradient-weighted Class Activation Mapping (Grad-CAM) visualizes class-discriminative regions and extracts candidate defect regions, while normalized cross-correlation generates event accumulation images at the same rotational phase for defect progression monitoring. Experiments with 65 mm three-blade propellers with approximately 1 mm artificial blade defects rotating at approximately 862 rpm showed that, in an exploratory accumulation-time analysis, 900 μs produced an image-level accuracy of 0.93; integrating images over one full rotation yielded no misclassifications under the present dataset. An additional experiment at 2610 rpm tracked defect progression using a quantitative indicator based on distance-transform pixel counts. These results support the feasibility of event-based sensing for defect detection, cropping candidate defect-related regions, and tracking an image-domain indicator associated with defect progression in high-speed rotating propellers under the tested conditions.

Schlagwörter

Stichwörter der Autor:innen

defect detectiondefect progression monitoringevent cameraevent-based vision

Autor:innen und Institutionen

  • National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8560, Japan.
  • Graduate School of Science and Technology, University of Tsukuba, Tsukuba 305-8573, Japan.

ORCID-Profile: Yosuke Ishikawa, Kenji Iwata, Yutaka Satoh

Förderung

  • National Institute of Advanced Industrial Science and Technology
  • AIST policy-based budget project “R&D on Generative AI Foundation Models for the Physical Domain”

Zitieren

APA

Ishikawa, Y., Iwata, K., & Satoh, Y. (2026). Event-Camera-Based Defect Detection of High-Speed Rotating Propellers. Sensors, 26(15), 4721. https://doi.org/10.3390/s26154721

Vancouver

Ishikawa Y, Iwata K, Satoh Y. Event-Camera-Based Defect Detection of High-Speed Rotating Propellers. Sensors. 2026;26(15):4721. doi:10.3390/s26154721

BibTeX
@article{Ishikawa2026,
  author = {Ishikawa, Yosuke and Iwata, Kenji and Satoh, Yutaka},
  title = {Event-Camera-Based Defect Detection of High-Speed Rotating Propellers},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {15},
  pages = {4721},
  doi = {10.3390/s26154721}
}
Kostenlos starten →