EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Joint Beamforming Design for Active RIS-Assisted ISAC Systems with Transmitter Hardware Impairments

Zhen Li iD, Jinhui Hu iD, Jian Xing iD

Sensors · 23.07.2026 · 26 (15) · 4682

DOI: 10.3390/s26154682 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 23.07.2026. Verfasst von Zhen Li und 2 weiteren Autor:innen. Beteiligte Einrichtung: College of Control and Information Engineering, Northeast Forestry University, Harbin 150040, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates an active reconfigurable intelligent surface (RIS)-assisted integrated sensing and communication (ISAC) system with transmitter hardware impairments (HWIs) at the base station (BS). The active RIS provides both phase adjustment and amplitude amplification, which helps mitigate the multiplicative fading effect of passive RIS-assisted cascaded links and establish virtual line-of-sight (LoS) links for the target and multiuser communication users. Considering the coupling among the BS transmitter distortion noise, active RIS amplification noise, and the active RIS power constraint, we formulate a radar output signal-to-noise ratio (SNR) maximization problem. The radar output SNR is maximized by jointly designing the radar receive filter, the BS transmit beamforming matrix, and the active RIS reflection coefficients, while satisfying the quality-of-service (QoS) requirements of communication users, the BS transmit power constraint, and the active RIS power budget constraint. To solve the resulting non-convex problem with fractional objectives and high-order coupling terms, an alternating optimization (AO)-based iterative framework is developed. Specifically, the radar receive filter is updated using the generalized Rayleigh quotient, the BS transmit beamforming subproblem is handled by semidefinite relaxation and the Charnes–Cooper transformation, and the active RIS reflection coefficient subproblem is solved using the Dinkelbach transformation and majorization–minimization. Simulation results demonstrate stable convergence and show that the proposed design improves radar output SNR under BS transmitter HWIs.

Schlagwörter

Stichwörter der Autor:innen

active RIShardware impairmentsintegrated sensing and communicationjoint beamforming optimization

Autor:innen und Institutionen

  • College of Control and Information Engineering, Northeast Forestry University, Harbin 150040, China.

ORCID-Profile: Zhen Li, Jinhui Hu, Jian Xing

Zitieren

APA

Li, Z., Hu, J., & Xing, J. (2026). Joint Beamforming Design for Active RIS-Assisted ISAC Systems with Transmitter Hardware Impairments. Sensors, 26(15), 4682. https://doi.org/10.3390/s26154682

Vancouver

Li Z, Hu J, Xing J. Joint Beamforming Design for Active RIS-Assisted ISAC Systems with Transmitter Hardware Impairments. Sensors. 2026;26(15):4682. doi:10.3390/s26154682

BibTeX
@article{Li2026,
  author = {Li, Zhen and Hu, Jinhui and Xing, Jian},
  title = {Joint Beamforming Design for Active RIS-Assisted ISAC Systems with Transmitter Hardware Impairments},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {15},
  pages = {4682},
  doi = {10.3390/s26154682}
}
Kostenlos starten →