EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Delay-Aware Switching Framework for Binary Actuator Systems Under Sensing Delay and Measurement Noise

Kiman Ji iD

Sensors · 20.07.2026 · 26 (14) · 4596

DOI: 10.3390/s26144596 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 20.07.2026. Verfasst von Kiman Ji. Beteiligte Einrichtung: Launch Vehicle Product Assurance Office, Space Launch Vehicle Research Directorate, Korea Aerospace Research Institute, Daejeon 34133, Republic of Ko…. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea AeroSpace Administration.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Binary actuator systems are widely used in industrial and agricultural automation because of their simple structure and low implementation cost. However, sensing delay and measurement noise can cause repeated triggering when threshold conditions are continuously evaluated using delayed feedback signals. This paper proposes a delay-aware switching framework for binary actuator systems operating under sensing uncertainty. The proposed framework structures the control cycle into sequential actuation, protected waiting, and idle phases. During the protected waiting phase, switching-condition evaluation is temporarily suspended to prevent redundant actuator commands caused by stale measurements. In addition, an adaptive supervisory mechanism updates the actuation duration and waiting interval using simple performance indicators obtained directly from sensor measurements, without requiring plant-model identification. The timing properties of the proposed switching sequence are analyzed, showing that the inter-event time is bounded below by a positive constant, thereby ensuring Zeno-free behavior. Simulation results demonstrate that the proposed framework eliminates repeated triggering and reduces oscillation amplitude under delayed and noisy measurements. Experimental validation using a Raspberry Pi-based thermal chamber further confirms bounded and regular switching behavior under artificially added measurement noise.

Schlagwörter

Stichwörter der Autor:innen

ON/OFF controlbinary actuator systemsdelay-aware switchingrepeated triggeringsensing delay

Autor:innen und Institutionen

  • Launch Vehicle Product Assurance Office, Space Launch Vehicle Research Directorate, Korea Aerospace Research Institute, Daejeon 34133, Republic of Korea.

ORCID-Profile: Kiman Ji

Förderung

  • Korea AeroSpace Administration

Zitieren

APA

Ji, K. (2026). A Delay-Aware Switching Framework for Binary Actuator Systems Under Sensing Delay and Measurement Noise. Sensors, 26(14), 4596. https://doi.org/10.3390/s26144596

Vancouver

Ji K. A Delay-Aware Switching Framework for Binary Actuator Systems Under Sensing Delay and Measurement Noise. Sensors. 2026;26(14):4596. doi:10.3390/s26144596

BibTeX
@article{Ji2026,
  author = {Ji, Kiman},
  title = {A Delay-Aware Switching Framework for Binary Actuator Systems Under Sensing Delay and Measurement Noise},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {14},
  pages = {4596},
  doi = {10.3390/s26144596}
}
Kostenlos starten →