EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Distance-Adaptive Method for Three-Axis Angle Measurement Based on an Optical Wedge

Jinkai Wang, Chengping Ran, Lihui Wang, Lizhong Zhang, Yangyang Bai

Sensors · 12.07.2026 · 26 (14) · 4430

DOI: 10.3390/s26144430 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 12.07.2026. Verfasst von Jinkai Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Changchun 130022, China. Die Arbeit nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Education of Jilin Province, Inner Mongolia Natural Science Foundation, Education Department of Jilin Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Existing non-contact three-axis angle-measurement methods are unsuitable for measuring the relative three-axis angles between the inner and outer ring frames of fifth-generation airborne optoelectronic gimbal platforms. Our previous study proposed a compact three-axis angle-measurement method based on an optical wedge for this application. However, the fixed-coefficient angle-solving model used in that method does not account for variations in the measurement distance L, which can produce distance-dependent nonlinear errors when axial displacement of the inner ring frame occurs. To address this limitation, the present study proposes a distance-adaptive method for three-axis angle measurements. An analytical measurement-distance model is established using ABCD ray-transfer-matrix theory, and L is incorporated into the fixed-coefficient angle-solving model. The fixed coefficients in the polynomial error-compensation model are thereby expressed as functions of L and updated according to the estimated measurement distance. Experimental results demonstrate that the proposed method significantly improves the measurement accuracy under varying-distance conditions. Taking the measurement-distance condition with the largest error, L = −2 mm, as an example, the RMS values of the measurement errors for the pitch, yaw, and roll angles are reduced from 13.0″, 8.4″, and 31.1″ to 5.6″, 3.8″, and 18.6″, respectively.

Schlagwörter

Stichwörter der Autor:innen

autocollimationdistance-adaptive methoderror compensationoptical wedgethree-axis angle measurement

Autor:innen und Institutionen

  • College of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Changchun 130022, China.
  • College of Optoelectronic Engineering, Changchun University of Science and Technology, Changchun 130022, China.
  • College of Engineering, Inner Mongolia Minzu University, Tongliao 028000, China.
  • Key Laboratory of Air-to-Ground Laser Communication for National Defense, Changchun University of Science and Technology, Changchun 130022, China.

Förderung

  • Department of Education of Jilin Province
  • Inner Mongolia Natural Science Foundation
  • Education Department of Jilin Province

Zitieren

APA

Wang, J., Ran, C., Wang, L., Zhang, L., & Bai, Y. (2026). A Distance-Adaptive Method for Three-Axis Angle Measurement Based on an Optical Wedge. Sensors, 26(14), 4430. https://doi.org/10.3390/s26144430

Vancouver

Wang J, Ran C, Wang L, Zhang L, Bai Y. A Distance-Adaptive Method for Three-Axis Angle Measurement Based on an Optical Wedge. Sensors. 2026;26(14):4430. doi:10.3390/s26144430

BibTeX
@article{Wang2026,
  author = {Wang, Jinkai and Ran, Chengping and Wang, Lihui and Zhang, Lizhong and Bai, Yangyang},
  title = {A Distance-Adaptive Method for Three-Axis Angle Measurement Based on an Optical Wedge},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {14},
  pages = {4430},
  doi = {10.3390/s26144430}
}
Kostenlos starten →