Design of a Distance-Compensated Infrared Thermometer for Canopy Temperature Monitoring
Sensors · 10.07.2026 · 26 (14) · 4380
DOI: 10.3390/s26144380 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 10.07.2026. Verfasst von Liem H T Nguyen und 5 weiteren Autor:innen. Beteiligte Einrichtung: McComish Department of Electrical Engineering and Computer Science, South Dakota State University, Brookings, SD 57007, USA. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United States Department of Agriculture, U.S. Department of Agriculture.
Abstract (Originalsprache)
Infrared (IR) thermometry is essential for non-contact surface temperature monitoring in precision agriculture, but conventional single-pixel devices exhibit distance-dependent measurement errors that hinder field deployment. Most existing solutions require either fixed-geometry installations, post-processing corrections, or expensive thermal imaging systems with computational overhead. This paper presents the design, development, and evaluation of an IR thermometer measurement system that implements a lightweight signal processing algorithm for distance compensation. The instrumentation module integrates the thermometer’s temperature signal with ultrasonic distance measurements and employs a distance-bias lookup table (LUT) calibrated at regulated setpoints. Real-time signal conditioning through bilinear interpolation generates corrected temperature outputs. Under controlled reference-target conditions, system evaluation across 5–200 cm shows that uncompensated errors reach approximately −5 °C at 200 cm, whereas the proposed signal processing reduces the distance-dependent residual RMSE to below 0.20 °C over the tested range. The instrument also preserves short-term repeatability, with standard deviations between 0.08 °C and 0.12 °C across stand-off distances from 20 to 200 cm. By delivering distance-invariant measurements through external signal processing, the system is designed to support flexible, height-independent deployment of single-pixel IR thermometry for precision agriculture applications such as canopy temperature monitoring. A preliminary field measurement on a live tree canopy under one overcast condition provides initial evidence that the distance-dependent drift can be reduced outdoors, with the compensated output remaining within 0.7 °C of an external handheld reference across the 5–200 cm range; comprehensive multi-condition field validation remains necessary in future work.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- McComish Department of Electrical Engineering and Computer Science, South Dakota State University, Brookings, SD 57007, USA.
- Department of Electrical Engineering, University of Texas at Arlington, Arlington, TX 76019, USA.
- National Center for Alluvial Aquifer Research, USDA Agricultural Research Service, Stoneville, MS 38776, USA.
- Smart Agriculture Research Center, University of Texas at Arlington, Arlington, TX 76019, USA.
- Department of Electrical Engineering, University of North Texas, Denton, TX 76203, USA.
ORCID-Profile: Liem H T Nguyen, Christopher D Delhom, Prasanna Gowda, Hyusim Park
Förderung
- United States Department of Agriculture
- U.S. Department of Agriculture
Zitieren
APA
Nguyen, L. H. T., Chilukuri, M., Delhom, C. D., Gowda, P., Jung, S., & Park, H. (2026). Design of a Distance-Compensated Infrared Thermometer for Canopy Temperature Monitoring. Sensors, 26(14), 4380. https://doi.org/10.3390/s26144380
Vancouver
Nguyen LHT, Chilukuri M, Delhom CD, Gowda P, Jung S, Park H. Design of a Distance-Compensated Infrared Thermometer for Canopy Temperature Monitoring. Sensors. 2026;26(14):4380. doi:10.3390/s26144380
BibTeX
@article{Nguyen2026,
author = {Nguyen, Liem H T and Chilukuri, Manu and Delhom, Christopher D and Gowda, Prasanna and Jung, Sungyong and Park, Hyusim},
title = {Design of a Distance-Compensated Infrared Thermometer for Canopy Temperature Monitoring},
journal = {Sensors},
year = {2026},
volume = {26},
number = {14},
pages = {4380},
doi = {10.3390/s26144380}
}
EUVIMED