EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Automatic Recognition and Quantification of Multiple Defects in Highway Tunnels Using Vehicle-Mounted Multisensor Inspection

Yipeng Liu, Jianyu Hong, Xuezeng Liu

Sensors · 10.07.2026 · 26 (14) · 4378

DOI: 10.3390/s26144378 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 10.07.2026. Verfasst von Yipeng Liu und 2 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou 730050, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With advances in computer vision and modern surveying technologies, intelligent inspection systems and automatic recognition methods are increasingly used in highway tunnel maintenance. However, existing mobile inspection methods still struggle to balance high-speed operation, fine-crack recognition, and comprehensive assessment of multiple defects. This study proposes an automatic recognition and quantitative assessment method for multiple visible defects in highway tunnels based on a vehicle-mounted multisensor inspection system. The system integrates high-resolution imaging, infrared illumination, 3D laser scanning, mileage positioning, and high-speed data storage, enabling continuous full-section data acquisition at speeds up to 80 km/h. A structural-feature-constrained mileage correction strategy is developed to reduce accumulated localization errors. For crack analysis, a multilevel framework combining two-stage CNN screening, cascaded segmentation, crack trajectory tracking, and subpixel edge extraction is established for crack recognition and 0.1 mm-level width measurement. Water leakage and spalling are extracted through visible–infrared image fusion and adaptive boundary refinement, while cross-sectional deformation is calculated using 3D tunnel axis reconstruction, point-cloud filtering, and cross-section fitting. Field tests and controlled experiments demonstrate that the system can rapidly identify, locate, and quantify multiple tunnel defects, providing a practical reference for intelligent tunnel inspection and maintenance.

Schlagwörter

Stichwörter der Autor:innen

defect quantificationdefect recognitionhighway tunnelmultisensor inspection

Autor:innen und Institutionen

  • College of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou 730050, China.
  • College of Civil Engineering, Tongji University, Shanghai 200092, China.

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Liu, Y., Hong, J., & Liu, X. (2026). Automatic Recognition and Quantification of Multiple Defects in Highway Tunnels Using Vehicle-Mounted Multisensor Inspection. Sensors, 26(14), 4378. https://doi.org/10.3390/s26144378

Vancouver

Liu Y, Hong J, Liu X. Automatic Recognition and Quantification of Multiple Defects in Highway Tunnels Using Vehicle-Mounted Multisensor Inspection. Sensors. 2026;26(14):4378. doi:10.3390/s26144378

BibTeX
@article{Liu2026,
  author = {Liu, Yipeng and Hong, Jianyu and Liu, Xuezeng},
  title = {Automatic Recognition and Quantification of Multiple Defects in Highway Tunnels Using Vehicle-Mounted Multisensor Inspection},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {14},
  pages = {4378},
  doi = {10.3390/s26144378}
}
Kostenlos starten →