EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Analysis of FBG Acceleration Sensor with Double-Sided Symmetrical Inclined Cantilever Beam Structure

Yuqi Tian iD, Mingpan Zou, Xuan Zhao, Pengyu Zhang iD, Hanbing Yan, Wenqing Wei iD, Zhixiang Wu, Hu Deng

Sensors · 09.07.2026 · 26 (14) · 4347

DOI: 10.3390/s26144347 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 09.07.2026. Verfasst von Yuqi Tian und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Information Engineering, Southwest University of Science and Technology, Mianyang 621010, China. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Southwest University of Science and Technology, Natural Science Foundation of Southwest University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To meet the demand for high-range and high-frequency impact acceleration measurements, a fiber Bragg grating (FBG) accelerometer with a double-sided symmetrical inclined cantilever beam structure is proposed. The sensing principle is analyzed based on inertial and FBG sensing theories, and theoretical models for sensitivity and resonant frequency are derived. Using PPA-CF material and parameter optimization, the structural dimensions of the cantilever beam, effective fiber length, and proof mass are determined through numerical simulation. Finite element modal analysis shows a first-order natural frequency of 1284 Hz, with the dominant mode being axial translation of the mass block, ensuring pure axial strain on the FBG. A drop-weight impact calibration system is established for experimental testing. Results demonstrate that the sensor achieves a resonant frequency exceeding 1333 Hz, a measurement range above 500 g, and a practical sensitivity of approximately 1.183 pm/g. The linear response exhibits a coefficient of determination, R2, of 0.9875, confirming excellent linearity. The proposed accelerometer effectively balances high-frequency response and measurement accuracy, providing a reliable solution for high-frequency impact monitoring in aerospace and impact dynamics applications.

Schlagwörter

Stichwörter der Autor:innen

accelerometerbilaterally symmetric tilted cantilever beamfiber Bragg gratinghigh-frequency impact

Autor:innen und Institutionen

  • School of Information Engineering, Southwest University of Science and Technology, Mianyang 621010, China.
  • School of Automation, Chengdu University of Information Technology, Chengdu 610225, China.
  • Hangzhou Hikimaging Technology Co., Ltd., Hangzhou 310051, China.
  • Sichuan Provincial Engineering Research Center for Artificial Intelligence Applications in Transportation, Sichuan Vocational and Technical College of Communications, Chengdu 611130, China.

ORCID-Profile: Yuqi Tian, Pengyu Zhang, Wenqing Wei

Förderung

  • National Natural Science Foundation of China
  • Southwest University of Science and Technology
  • Natural Science Foundation of Southwest University of Science and Technology

Zitieren

APA

Tian, Y., Zou, M., Zhao, X., Zhang, P., Yan, H., Wei, W., Wu, Z., & Deng, H. (2026). Design and Analysis of FBG Acceleration Sensor with Double-Sided Symmetrical Inclined Cantilever Beam Structure. Sensors, 26(14), 4347. https://doi.org/10.3390/s26144347

Vancouver

Tian Y, Zou M, Zhao X, Zhang P, Yan H, Wei W, et al. Design and Analysis of FBG Acceleration Sensor with Double-Sided Symmetrical Inclined Cantilever Beam Structure. Sensors. 2026;26(14):4347. doi:10.3390/s26144347

BibTeX
@article{Tian2026,
  author = {Tian, Yuqi and Zou, Mingpan and Zhao, Xuan and Zhang, Pengyu and Yan, Hanbing and Wei, Wenqing and Wu, Zhixiang and Deng, Hu},
  title = {Design and Analysis of FBG Acceleration Sensor with Double-Sided Symmetrical Inclined Cantilever Beam Structure},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {14},
  pages = {4347},
  doi = {10.3390/s26144347}
}
Kostenlos starten →