EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstrip Antenna Design and Its Application in Moisture Detection

Shiqin Wang iD, Haotian Shi, Huichuan Lin, Huanting Chen iD, Jun Zeng, Zhimin He, Yan Li

Sensors · 06.07.2026 · 26 (13) · 4291

DOI: 10.3390/s26134291 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 06.07.2026. Verfasst von Shiqin Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Physics and Information Engineering, Minnan Normal University, Zhangzhou 363000, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Moisture content is a critical parameter during processing and storage. Although conventional microwave-based moisture detection methods enable rapid and non-destructive measurement, they are often hindered by high cost and susceptibility to design limitations and environmental fluctuations. In this study, a partial ground plane technique combined with a beveled partial ground and corner truncation topology is employed to enhance antenna architecture. By accounting for the nonlinear relationship between antenna dimensions and operating bandwidth, the bandwidth is significantly broadened without increasing the antenna footprint. A novel microstrip antenna is developed using low-cost epoxy resin (FR4) as the substrate. To address the instability and narrow bandwidth often associated with microstrip antennas, an electromagnetic simulation model was constructed using HFSS. This model characterizes the relationship between dimensional parameters and bandwidth, facilitating antenna optimization. Simulation results demonstrate that the operating frequency remains stable at 915 MHz, while the operating bandwidth is expanded from 0.91–0.92 GHz to 0.6–1.1 GHz without increasing the antenna size, thereby satisfying the requirements for material moisture detection. The proposed antenna is integrated into the moisture detection circuit developed in this study, and its stability is evaluated under various environmental conditions. Results indicate that the novel microstrip antenna achieves high detection performance and is robust against environmental variations, while offering reduced fabrication costs. This study provides a new direction for the miniaturization and cost reduction of moisture detection systems.

Schlagwörter

Stichwörter der Autor:innen

corner truncation techniquemoisture content detectionnew-type microstrip patch antennaoptimization of antenna dimensionspartial ground technique

Autor:innen und Institutionen

  • College of Physics and Information Engineering, Minnan Normal University, Zhangzhou 363000, China.
  • Optoelectronic Materials & Device Application Industry Technological Development Base of Fujian Province, Zhangzhou 363000, China.
  • Key Laboratory of Light Field Manipulation and System Integration Applications in Fujian Province, Zhangzhou 363000, China.

ORCID-Profile: Shiqin Wang, Huanting Chen

Zitieren

APA

Wang, S., Shi, H., Lin, H., Chen, H., Zeng, J., He, Z., & Li, Y. (2026). Microstrip Antenna Design and Its Application in Moisture Detection. Sensors, 26(13), 4291. https://doi.org/10.3390/s26134291

Vancouver

Wang S, Shi H, Lin H, Chen H, Zeng J, He Z, et al. Microstrip Antenna Design and Its Application in Moisture Detection. Sensors. 2026;26(13):4291. doi:10.3390/s26134291

BibTeX
@article{Wang2026,
  author = {Wang, Shiqin and Shi, Haotian and Lin, Huichuan and Chen, Huanting and Zeng, Jun and He, Zhimin and Li, Yan},
  title = {Microstrip Antenna Design and Its Application in Moisture Detection},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {13},
  pages = {4291},
  doi = {10.3390/s26134291}
}
Kostenlos starten →