EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Deterministic Edge-Controlled Precision Fertigation System with Spatial Task Scheduling and Hardware–Software Safety Interlock

Ziheng Wang iD, Jiahui Chen iD, Hongjian Zhao, Bing Wei

Sensors · 06.07.2026 · 26 (13) · 4289

DOI: 10.3390/s26134289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 06.07.2026. Verfasst von Ziheng Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Research Institute of Automation for Machinery Industry Co., Ltd., Beijing 100120, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cloud-dependent irrigation platforms can support remote monitoring, but their use in precision fertigation is limited when local decisions must be made quickly and reliably. Network delay, temporary disconnection, and the use of single-point measurements may all reduce the ability of a system to respond to spatial variation in soil moisture and nutrient demand. In this work, an edge-controlled precision fertigation system was developed by combining multi-parameter soil sensing, spatial task scheduling, and a 6-DOF robotic manipulator. The ESP32 controller runs a preemptive FreeRTOS scheduler, allowing sensor acquisition, inverse-kinematics calculation, and pump actuation to be handled as separate tasks. A Kalman filter was used to smooth soil moisture measurements, and a hysteresis-based control strategy was adopted to reduce false triggering and repeated pump switching. To improve fertigation safety, a hardware–software interlock was added so that fertilizer delivery is always accompanied by water delivery. Hardware-in-the-Loop simulation and a 14-day field deployment were used to evaluate the system. The controller achieved an end-to-end latency of less than 38 ms and maintained operation during network interruptions through cached local parameters. After calibration, the robotic end-effector positioning error was reduced to ±2.4 mm. The hysteresis strategy lowered daily pump cycling by 71%. Based on prototype duty-cycle data and seasonal extrapolation, the projected seasonal water use and fertilizer demand were 44% and 38% lower, respectively, than those estimated for a uniform application. These values should be interpreted as model-based projections rather than direct season-long measurements. During 72 h of continuous operation, no Modbus faults were observed, and RTOS heap fragmentation remained stable. Overall, the results suggest that edge-based deterministic control can provide a practical route for precision fertigation where both spatial variability and intermittent connectivity must be considered.

Schlagwörter

Stichwörter der Autor:innen

Kalman filteringRS485 sensorsadaptive controledge computinghardware–software interlockprecision irrigationrobotic manipulatorvariable-rate fertigation

Autor:innen und Institutionen

  • Beijing Research Institute of Automation for Machinery Industry Co., Ltd., Beijing 100120, China.
  • China Academy of Machinery Wuhan Research Institute of Materials Protection Co., Ltd., Wuhan 430030, China.

ORCID-Profile: Ziheng Wang, Jiahui Chen

Zitieren

APA

Wang, Z., Chen, J., Zhao, H., & Wei, B. (2026). Deterministic Edge-Controlled Precision Fertigation System with Spatial Task Scheduling and Hardware–Software Safety Interlock. Sensors, 26(13), 4289. https://doi.org/10.3390/s26134289

Vancouver

Wang Z, Chen J, Zhao H, Wei B. Deterministic Edge-Controlled Precision Fertigation System with Spatial Task Scheduling and Hardware–Software Safety Interlock. Sensors. 2026;26(13):4289. doi:10.3390/s26134289

BibTeX
@article{Wang2026,
  author = {Wang, Ziheng and Chen, Jiahui and Zhao, Hongjian and Wei, Bing},
  title = {Deterministic Edge-Controlled Precision Fertigation System with Spatial Task Scheduling and Hardware–Software Safety Interlock},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {13},
  pages = {4289},
  doi = {10.3390/s26134289}
}
Kostenlos starten →