EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Attention-Enhanced Feature-Based Point Cloud Completion Network for Precision Parts

Hongfei Zu iD, Chenzan Wang iD, Xuwen Chen, Ke Zheng, Enhao Li, Zhangwei Chen

Sensors · 03.07.2026 · 26 (13) · 4236

DOI: 10.3390/s26134236 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 03.07.2026. Verfasst von Hongfei Zu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

When acquiring point cloud data of precision parts using 3D scanning devices, occlusion or equipment limitations often lead to sparse and incomplete data, resulting in the distortion or loss of key geometric features. To address this issue, this study proposes an attention-enhanced feature-based point cloud completion network for precision parts, using precision bearing rings as an example to construct a dedicated completion dataset for training. The proposed network adopts an encoder–decoder architecture. In the encoder stage, a curvature-weighted sampling feature extraction module and spatial attention mechanism are introduced to extract both local and global features from the incomplete point cloud, followed by multilevel feature fusion. The multiscale features extracted by the encoder are then fed into the decoder, which hierarchically and progressively predicts the missing regions of the point cloud. Finally, an adversarial generation module incorporating a biased attention mechanism enhances the sensitivity of the network to geometric structural differences, thereby producing a complete and refined point cloud as the final output. Experimental results show that on the ShapeNet-part dataset, the proposed network achieves average CD, Pred → GT, and GT → Pred errors of 4.663, 2.459, and 2.457, respectively, representing reductions of 10.8%, 4.7%, and 8.1%, respectively, compared with the mainstream PF-Net completion network. On the bearing ring dataset constructed in this study, the average CD, Pred → GT, and GT → Pred errors were 0.497, 1.064, and 0.601, respectively, decreasing by 9.3%, 16.3%, and 16.2%, respectively, relative to PF-Net. Moreover, the proposed network effectively completed the point clouds of various missing parts, demonstrating its robustness across different types of precision parts.

Schlagwörter

Stichwörter der Autor:innen

3D scanningattention mechanismpoint cloud completionprecision parts

Autor:innen und Institutionen

  • School of Mechanical Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China.
  • Zhejiang Premax Technology Co., Ltd., Ningbo 315048, China.
  • State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310058, China.

ORCID-Profile: Hongfei Zu, Chenzan Wang

Förderung

  • National Key R&D Program of China
  • National Key R&D Program of China

Zitieren

APA

Zu, H., Wang, C., Chen, X., Zheng, K., Li, E., & Chen, Z. (2026). Attention-Enhanced Feature-Based Point Cloud Completion Network for Precision Parts. Sensors, 26(13), 4236. https://doi.org/10.3390/s26134236

Vancouver

Zu H, Wang C, Chen X, Zheng K, Li E, Chen Z. Attention-Enhanced Feature-Based Point Cloud Completion Network for Precision Parts. Sensors. 2026;26(13):4236. doi:10.3390/s26134236

BibTeX
@article{Zu2026,
  author = {Zu, Hongfei and Wang, Chenzan and Chen, Xuwen and Zheng, Ke and Li, Enhao and Chen, Zhangwei},
  title = {Attention-Enhanced Feature-Based Point Cloud Completion Network for Precision Parts},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {13},
  pages = {4236},
  doi = {10.3390/s26134236}
}
Kostenlos starten →