EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Probabilistic Residual Modeling for Sensor-Based Process–Quality Fault Detection in Industrial Systems

Lirong Zhang, Xianwen Bao

Sensors · 03.07.2026 · 26 (13) · 4201

DOI: 10.3390/s26134201 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 03.07.2026. Verfasst von Lirong Zhang und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Aeronautical Engineering, Beijing Polytechnic University, No.9, Liangshuihe 1st Street, Beijing Economic and Development Zone, Beijing 1001…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Youth Top Talent Project of Beijing Polytechnic University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sensor-based process monitoring often involves both process variables and quality-related variables. These variables are usually used together to detect faults and to evaluate their effects on process quality or performance. However, most existing monitoring methods still rely on squared reconstruction residuals. This treatment assumes a fixed residual structure and may be insufficient for nonlinear industrial processes. In practice, residual variances may vary with operating conditions. Residuals from different variables may also be correlated. To address this problem, this paper proposes a probabilistic residual modeling method for process–quality fault detection. The method retains the latent-variable structure of deep variational canonical correlation analysis. It further introduces conditional residual distributions for the process side and the quality side. These distributions are parameterized by the latent operating state inferred from sensor measurements. Residual negative log-likelihoods are then used as monitoring statistics. In this way, residual abnormality is evaluated under the current operating condition. The proposed method is verified on a three-phase flow facility and a continuous stirred tank reactor process. Compared with PLS, CCA, DCCA, and DVCCA, the proposed method improves the detection of process-side disturbances and provides clearer separation between process-related and quality-related abnormal responses. Quantitatively, in the TPFF air line blockage case, the process-side statistic Jx achieved an FDR of 82.02% with an FAR of 1.52%, compared with an FDR of 52.02% obtained by the corresponding DVCCA statistic SPEx. In the TPFF open direct bypass case, Jx and Jy achieved FDRs of 90.87% and 91.07%, respectively, with FARs of 0.00%. In the CSTR coolant-temperature sensor-bias case, Jx achieved an FDR of 88.29% with an FAR of 0.00%, while Jy remained below its control limit, supporting process–quality fault discrimination.

Schlagwörter

Stichwörter der Autor:innen

deep learningfault detectionindustrial sensor dataprobabilistic residual modelingprocess–quality monitoring

Autor:innen und Institutionen

  • School of Aeronautical Engineering, Beijing Polytechnic University, No.9, Liangshuihe 1st Street, Beijing Economic and Development Zone, Beijing 100176, China.

Förderung

  • Youth Top Talent Project of Beijing Polytechnic University

Zitieren

APA

Zhang, L., & Bao, X. (2026). Probabilistic Residual Modeling for Sensor-Based Process–Quality Fault Detection in Industrial Systems. Sensors, 26(13), 4201. https://doi.org/10.3390/s26134201

Vancouver

Zhang L, Bao X. Probabilistic Residual Modeling for Sensor-Based Process–Quality Fault Detection in Industrial Systems. Sensors. 2026;26(13):4201. doi:10.3390/s26134201

BibTeX
@article{Zhang2026,
  author = {Zhang, Lirong and Bao, Xianwen},
  title = {Probabilistic Residual Modeling for Sensor-Based Process–Quality Fault Detection in Industrial Systems},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {13},
  pages = {4201},
  doi = {10.3390/s26134201}
}
Kostenlos starten →