EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fiber Bragg Grating Dynamic Sensing Through a Dispersive Spectrometer

Yohan Barbarin iD, Alexandre Lefrançois, Victor Colas iD, Sylvain Magne iD, Thomas Blanchet iD, Laurent Fieschi, Vincent Chuzeville, Jean-Marc Chevalier, Jérôme Luc, Antoine Osmont

Sensors · 01.07.2026 · 26 (13) · 4152

DOI: 10.3390/s26134152 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 01.07.2026. Verfasst von Yohan Barbarin und 9 weiteren Autor:innen. Beteiligte Einrichtung: CEA, DAM, GRAMAT, BP 80200, 46500 Gramat, France. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence Nationale de la Recherche, CEA, DGA.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the field of shock physics and energetic materials, Fiber Bragg Gratings (FBGs) are used to measure shock velocity, detonation velocity and shock pressure levels. They are also used to measure strain in structures loaded with explosive effects. FBG sensors are known to be light, small, immune electromagnetic environments and have fast response compared to electrical sensors. To use one or more gratings along a fiber, a high-resolution spectrometer with a high sampling rate has been developed. This dynamic spectrometer employs time-multiplexing by wavelength-to-time conversion using dispersion. It provides a complete view of the spectra evolution at a rate of 100 MHz. Thus, complex phenomena can be observed. In this paper, the interrogation technique is presented in more detail, and experimental results are discussed. The experiments presented are a low-pressure shock velocity measurement in epoxy, a deflagration-to-detonation transition in a porous energetic material, a Shock-to-Detonation Transition in a dense energetic material, a tentative-to-measure pressure level in epoxy from an FBG made in a sapphire fiber and multi-point strain measurements up to eight FBGs. The advantages and limits are discussed for each type of experiment.

Schlagwörter

Stichwörter der Autor:innen

deflagrationdetonationenergetic materialfiber Bragg gratingpressurestrain

Autor:innen und Institutionen

  • CEA, DAM, GRAMAT, BP 80200, 46500 Gramat, France.
  • Université Paris-Saclay, CEA, List, 91120 Palaiseau, France.
  • CEA, DAM, CESTA, 33116 Le Barp, France.

ORCID-Profile: Yohan Barbarin, Victor Colas, Sylvain Magne, Thomas Blanchet

Förderung

  • Agence Nationale de la Recherche
  • CEA
  • DGA
  • CEA PTC-SAPHIR project

Zitieren

APA

Barbarin, Y., Lefrançois, A., Colas, V., Magne, S., Blanchet, T., Fieschi, L., Chuzeville, V., Chevalier, J. M., Luc, J., & Osmont, A. (2026). Fiber Bragg Grating Dynamic Sensing Through a Dispersive Spectrometer. Sensors, 26(13), 4152. https://doi.org/10.3390/s26134152

Vancouver

Barbarin Y, Lefrançois A, Colas V, Magne S, Blanchet T, Fieschi L, et al. Fiber Bragg Grating Dynamic Sensing Through a Dispersive Spectrometer. Sensors. 2026;26(13):4152. doi:10.3390/s26134152

BibTeX
@article{Barbarin2026,
  author = {Barbarin, Yohan and Lefrançois, Alexandre and Colas, Victor and Magne, Sylvain and Blanchet, Thomas and Fieschi, Laurent and Chuzeville, Vincent and Chevalier, Jean-Marc and Luc, Jérôme and Osmont, Antoine},
  title = {Fiber Bragg Grating Dynamic Sensing Through a Dispersive Spectrometer},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {13},
  pages = {4152},
  doi = {10.3390/s26134152}
}
Kostenlos starten →