EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A High-Density Nanoporous SERS Substrate Prepared by Facile One-Step Anodization for P-Hydroxybenzoic Acid Detection

Chin-An Ku iD, Chen-Kuei Chung iD

Sensors · 25.06.2026 · 26 (13) · 4048

DOI: 10.3390/s26134048 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 25.06.2026. Verfasst von Chin-An Ku und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, National Cheng Kung University, Tainan 701, Taiwan. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Compared with mass spectrometry or high-performance liquid chromatography (HPLC), surface-enhanced Raman scattering (SERS) is a promising alternative technique for inspection of preservatives in food safety. However, conventional SERS substrates based on metallic nanoparticles commonly suffer from complicated fabrication processes, long processing times, and high costs. Therefore, we propose a high-density porous anodic aluminum oxide (AAO) substrate prepared by one-step anodization process combined with pore widening to increase number of SERS hotspots on template. Through a rapid one-step anodization process conducted at 25 °C, the processing time and efficiency are greatly improved compared to conventional low temperature of 0–10 °C and two-step anodization method. By lowering the anodization voltage to 20 V, a high-density porous substrate is achieved, effectively enhancing the SERS signal intensity. Furthermore, we demonstrated that SERS signal intensities are affected by multiple correlated structural factors and significantly improved by lower anodization voltage with pore widening. The analytical enhancement factor is calculated as 1.18 × 105 to 1.44 × 107 on an AAO substrate prepared at 20 V with pore-widening process for 1000 and 0.1 ppm p-hydroxybenzoic acid, respectively. For the preservative detection of p-hydroxybenzoic acid, a detection limit of 100 ppb is achieved by a high-density AAO substrate prepared at 20 V, which is far below the regulatory limit of 600 ppm.

Schlagwörter

Stichwörter der Autor:innen

AAOSERSanodic aluminum oxidehigh-density porous substratep-hydroxybenzoic acidsurface-enhanced Raman scattering

Autor:innen und Institutionen

  • Department of Mechanical Engineering, National Cheng Kung University, Tainan 701, Taiwan.

ORCID-Profile: Chin-An Ku, Chen-Kuei Chung

Förderung

  • National Science and Technology Council

Zitieren

APA

Ku, C. A., & Chung, C. K. (2026). A High-Density Nanoporous SERS Substrate Prepared by Facile One-Step Anodization for P-Hydroxybenzoic Acid Detection. Sensors, 26(13), 4048. https://doi.org/10.3390/s26134048

Vancouver

Ku CA, Chung CK. A High-Density Nanoporous SERS Substrate Prepared by Facile One-Step Anodization for P-Hydroxybenzoic Acid Detection. Sensors. 2026;26(13):4048. doi:10.3390/s26134048

BibTeX
@article{Ku2026,
  author = {Ku, Chin-An and Chung, Chen-Kuei},
  title = {A High-Density Nanoporous SERS Substrate Prepared by Facile One-Step Anodization for P-Hydroxybenzoic Acid Detection},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {13},
  pages = {4048},
  doi = {10.3390/s26134048}
}
Kostenlos starten →