EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Soil-Specific Calibration and Integration of Low-Cost Capacitive Soil Moisture Sensors into a Solar-Powered Sensor Node

Yakubu S Zakaria, Sheng Chen iD, Thomas A Adongo, Gordana Kranjac-Berisavljevic, Hadi Larijani iD

Sensors · 23.06.2026 · 26 (13) · 3979

DOI: 10.3390/s26133979 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 23.06.2026. Verfasst von Yakubu S Zakaria und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Agricultural Engineering, School of Engineering, University for Development Studies, Tamale TL1350, Ghana. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovate UK.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate real-time soil moisture monitoring is critical for optimizing water use and ensuring crop health and food security. This study aims to calibrate and integrate low-cost capacitive soil moisture sensors into a solar-powered sensor node for real-time soil moisture monitoring in a loamy sand soil. Three capacitive soil moisture sensors were calibrated in the laboratory under controlled volumetric water content conditions (0–40%) using a constrained linear regression approach. The system was tested in a limited pilot-scale in a drip-irrigated onion field at the IWAD farm, Yagaba (North-East Region, Ghana). The results showed good agreement of the sensor readings with the soil moisture obtained using the gravimetric method (R2 of 0.92–0.94, RMSE of 0.40–0.52%, and MAE of 0.35–0.39%) demonstrating the successful transfer of the calibration functions to field conditions. Soil moisture data was successfully monitored and transmitted from the nodes to a LoRa gateway via LoRaWAN (433 MHz) and from the gateway to a Raspberry Pi edge server via Wi-Fi. Data was stored both locally in SQLite on the Raspberry Pi and on the InfluxDB cloud. These results suggest that the developed system, when extensively validated under field conditions, can be used to support decision-making for data-driven IoT-based irrigation scheduling.

Schlagwörter

Stichwörter der Autor:innen

ESP32InfluxDBMQTTcapacitive soil moisture sensorconstrained linear calibrationinternet of thingssoil-specific calibrationsolar-powered wireless sensor node

Autor:innen und Institutionen

  • Department of Agricultural Engineering, School of Engineering, University for Development Studies, Tamale TL1350, Ghana.
  • Department of Engineering, Glasgow Caledonian University, Glasgow G4 0BA, UK.
  • Department of Agricultural Mechanization and Irrigation Technology, Faculty of Agriculture, Food and Consumer Sciences, University for Dvelopment Studies, Tamale TL1350, Ghana.
  • West African Center for Water, Irrigation and Sustainable Agriculture, University for Development Studies, Tamale TL1350, Ghana.
  • Department of Computer Science, Glasgow Caledonian University, Glasgow G4 0BA, UK.

ORCID-Profile: Sheng Chen, Hadi Larijani

Förderung

  • Innovate UK

Zitieren

APA

Zakaria, Y. S., Chen, S., Adongo, T. A., Kranjac-Berisavljevic, G., & Larijani, H. (2026). Soil-Specific Calibration and Integration of Low-Cost Capacitive Soil Moisture Sensors into a Solar-Powered Sensor Node. Sensors, 26(13), 3979. https://doi.org/10.3390/s26133979

Vancouver

Zakaria YS, Chen S, Adongo TA, Kranjac-Berisavljevic G, Larijani H. Soil-Specific Calibration and Integration of Low-Cost Capacitive Soil Moisture Sensors into a Solar-Powered Sensor Node. Sensors. 2026;26(13):3979. doi:10.3390/s26133979

BibTeX
@article{Zakaria2026,
  author = {Zakaria, Yakubu S and Chen, Sheng and Adongo, Thomas A and Kranjac-Berisavljevic, Gordana and Larijani, Hadi},
  title = {Soil-Specific Calibration and Integration of Low-Cost Capacitive Soil Moisture Sensors into a Solar-Powered Sensor Node},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {13},
  pages = {3979},
  doi = {10.3390/s26133979}
}
Kostenlos starten →