EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of Intentional Electromagnetic Interference Effects on PWM Command Interpretation in UAV BLDC Motor Controllers

Hyunsu Cho iD, Euijin Kim iD, Wonsuk Choi iD

Sensors · 18.06.2026 · 26 (12) · 3881

DOI: 10.3390/s26123881 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.06.2026. Verfasst von Hyunsu Cho und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Cybersecurity, Korea University, Seoul 02841, Republic of Korea. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agency for Defense Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multirotor unmanned aerial vehicles (UAVs) rely on electronic speed controllers (ESCs) that decode motor commands from pulse-width modulation (PWM) signals, making the flight-controller-to-ESC command path a physical-layer attack surface for intentional electromagnetic interference (IEMI). This paper presents a mechanism-based analysis of IEMI attacks that induce motor stoppage in UAV brushless DC motor controllers. We develop a timing-error model in which a sinusoidal disturbance on the PWM line shifts the detected edge instants and drives the decoded pulse width into stop-equivalent regimes, and we show that the disturbance reaching the ESC’s thresholding node is shaped by a frequency-selective cascade of the PWM cable’s coupling response and the ESC’s input-path transfer function. We experimentally characterize this model on five commercial ESCs through conducted and radiated injection. The measured thresholds differ by more than an order of magnitude across ESCs and are reordered between frequency bands and injection modes; comparing conducted and radiated results allows us to attribute these differences primarily to the cable coupling response and reveals cases where it either hides or amplifies an ESC’s susceptibility. The susceptible frequency also shifts with PWM cable length in qualitative agreement with transmission-line resonance, confirming that observed radiated susceptibility reflects the joint design of ESC and cable rather than a single intrinsic property. The cable lengths examined here (45–125 cm) are longer than those of compact multirotors and were chosen to place resonances within our antenna’s band; we discuss the implications of this choice and identify shorter, deployment-realistic cables as a priority for future work.

Schlagwörter

Stichwörter der Autor:innen

UAV securitybrushless DC motorelectronic speed controllerintentional electromagnetic interferencemotor stoppagephysical-layer attackpulse-width modulation

Autor:innen und Institutionen

  • School of Cybersecurity, Korea University, Seoul 02841, Republic of Korea.

ORCID-Profile: Hyunsu Cho, Euijin Kim, Wonsuk Choi

Förderung

  • Agency for Defense Development

Zitieren

APA

Cho, H., Kim, E., & Choi, W. (2026). Analysis of Intentional Electromagnetic Interference Effects on PWM Command Interpretation in UAV BLDC Motor Controllers. Sensors, 26(12), 3881. https://doi.org/10.3390/s26123881

Vancouver

Cho H, Kim E, Choi W. Analysis of Intentional Electromagnetic Interference Effects on PWM Command Interpretation in UAV BLDC Motor Controllers. Sensors. 2026;26(12):3881. doi:10.3390/s26123881

BibTeX
@article{Cho2026,
  author = {Cho, Hyunsu and Kim, Euijin and Choi, Wonsuk},
  title = {Analysis of Intentional Electromagnetic Interference Effects on PWM Command Interpretation in UAV BLDC Motor Controllers},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {12},
  pages = {3881},
  doi = {10.3390/s26123881}
}
Kostenlos starten →