An FPGA-Based DDS-Synchronized Quadrature Lock-In Module for Sweep-Field Demodulation in a Single-Beam SERF Magnetometer
Sensors · 17.06.2026 · 26 (12) · 3850
DOI: 10.3390/s26123850 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 17.06.2026. Verfasst von Dongjing Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Extreme Environment Optoelectronic Dynamic Measurement Technology and Instrument, North University of China, Taiyuan 030051, …. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Central Government Guides Local Science and Technology Development Fund Project of Shanxi Province.
Abstract (Originalsprache)
Sweep-field operation in a single-beam spin-exchange relaxation-free (SERF) magnetometer requires stable extraction of the dispersion zero-crossing. A frequency mismatch between the modulation signal and the demodulation references, or an unsuitable low-pass filter, can shift this zero-crossing and affect working-point determination. This paper presents a zero-crossing-stability-oriented FPGA quadrature lock-in module for SERF sweep-field demodulation. The module is designed around two requirements of sweep-field operation: maintaining a common frequency basis between the modulation output and the demodulation references, and preserving the dispersion zero-crossing when the low-pass-filter cutoff frequency is adjusted. A shared direct digital synthesizer generates both the sinusoidal modulation output and the I/Q references, keeping the excitation and demodulation signals on the same frequency basis. After quadrature multiplication, CIC decimation and a reloadable Kaiser-window FIR filter are used for low-pass processing. Board-level tests show a 1000.054 Hz spectral peak for a 1000 Hz setting and a loopback amplitude of 0.496 V, close to the ideal 0.500 V baseband amplitude. On the SERF platform, I/Q rotation reduces the quadrature residual ratio from 32.1% to 0.10%. When the FIR cutoff frequency is changed from 3 to 15 Hz, the maximum zero-crossing difference is about 0.58 ms, corresponding to 0.12% of the 2 Hz sweep period. These results show that the module supports stable zero-crossing extraction and working-point determination during sweep-field operation in a single-beam SERF magnetometer.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Extreme Environment Optoelectronic Dynamic Measurement Technology and Instrument, North University of China, Taiyuan 030051, China.
ORCID-Profile: Dongjing Zhang
Förderung
- Central Government Guides Local Science and Technology Development Fund Project of Shanxi Province
Zitieren
APA
Zhang, D., Hao, X., Jia, R., Yu, X., Fu, Y., Ma, N., & Cui, Z. (2026). An FPGA-Based DDS-Synchronized Quadrature Lock-In Module for Sweep-Field Demodulation in a Single-Beam SERF Magnetometer. Sensors, 26(12), 3850. https://doi.org/10.3390/s26123850
Vancouver
Zhang D, Hao X, Jia R, Yu X, Fu Y, Ma N, et al. An FPGA-Based DDS-Synchronized Quadrature Lock-In Module for Sweep-Field Demodulation in a Single-Beam SERF Magnetometer. Sensors. 2026;26(12):3850. doi:10.3390/s26123850
BibTeX
@article{Zhang2026,
author = {Zhang, Dongjing and Hao, Xiaojian and Jia, Rui and Yu, Xinying and Fu, Yifei and Ma, Nengqiang and Cui, Zheming},
title = {An FPGA-Based DDS-Synchronized Quadrature Lock-In Module for Sweep-Field Demodulation in a Single-Beam SERF Magnetometer},
journal = {Sensors},
year = {2026},
volume = {26},
number = {12},
pages = {3850},
doi = {10.3390/s26123850}
}
EUVIMED