EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Accuracy Indoor Multiple-Extended-Target Tracking Algorithm Based on 60 GHz Millimeter-Wave Radar

Bo Gao, Jianzhong Chen, Bo Huang, Geng Yang

Sensors · 12.06.2026 · 26 (12) · 3758

DOI: 10.3390/s26123758 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 12.06.2026. Verfasst von Bo Gao und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Information and Control Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Xi'an University of Architecture and Technology, Shaanxi Provincial Key Research and Development Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rapid development of Internet of Things technologies has accelerated the deployment of smart home systems. However, perception solutions based on visual sensors remain constrained by illumination sensitivity, occlusion, and privacy concerns. Frequency-modulated continuous-wave (FMCW) millimeter-wave radar provides a promising alternative because it operates independently of lighting conditions, is robust to environmental changes, and preserves user privacy. To address multiple-extended-target tracking in cluttered indoor environments, this paper proposes a high-accuracy tracking algorithm that combines an improved Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm, an optimized Nearest-Neighbor Data Association (NNDA) scheme, and an Extended Kalman Filter (EKF). The improved DBSCAN algorithm introduces spatial-extent constraints, velocity-consistency checks, and candidate-cluster validation to cluster raw radar point clouds and convert extended targets into representative point targets with little additional computational cost. The optimized NNDA scheme then integrates clustering information into the association process, improving the matching accuracy between existing tracks and current measurements. Finally, the EKF estimates the state of each target from the associated measurements. Real-world experiments show that the proposed algorithm achieves tracking errors below 0.4 m in typical motion scenarios, maintains continuous tracking in two-person crossing scenarios, and reaches 93.3% counting accuracy in five-person scenarios. These results outperform the tracking system based on the commercial Texas Instruments (TI) IWR6843ISK millimeter-wave radar evaluation board. The proposed method offers a reliable and privacy-preserving sensing solution for smart homes, elderly care, and intelligent building applications.

Schlagwörter

Stichwörter der Autor:innen

Density-Based Spatial Clustering of Applications with NoiseExtended Kalman FilterNearest-Neighbor Data Associationmillimeter-wave radarmultiple-extended-target tracking

Autor:innen und Institutionen

  • College of Information and Control Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China.
  • Faculty of Electronic and Information Engineering, Xi'an Jiaotong University, Xi'an 710049, China.

Förderung

  • National Natural Science Foundation of China
  • Xi'an University of Architecture and Technology
  • Shaanxi Provincial Key Research and Development Program

Zitieren

APA

Gao, B., Chen, J., Huang, B., & Yang, G. (2026). High-Accuracy Indoor Multiple-Extended-Target Tracking Algorithm Based on 60 GHz Millimeter-Wave Radar. Sensors, 26(12), 3758. https://doi.org/10.3390/s26123758

Vancouver

Gao B, Chen J, Huang B, Yang G. High-Accuracy Indoor Multiple-Extended-Target Tracking Algorithm Based on 60 GHz Millimeter-Wave Radar. Sensors. 2026;26(12):3758. doi:10.3390/s26123758

BibTeX
@article{Gao2026,
  author = {Gao, Bo and Chen, Jianzhong and Huang, Bo and Yang, Geng},
  title = {High-Accuracy Indoor Multiple-Extended-Target Tracking Algorithm Based on 60 GHz Millimeter-Wave Radar},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {12},
  pages = {3758},
  doi = {10.3390/s26123758}
}
Kostenlos starten →