EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Validating 3D Printing as a Rapid Prototyping Framework for Hemispherical Resonator: Design, Simulation, and Testing

Ali F Abdulla iD, Jingning Ma, Mohamed Bognash, Samuel F Asokanthan

Sensors · 12.06.2026 · 26 (12) · 3752

DOI: 10.3390/s26123752 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 12.06.2026. Verfasst von Ali F Abdulla und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Materials Engineering, The University of Western Ontario, London, ON N6A 5B9, Canada. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Natural Science and Engineering Research Council (NSERC), Canada Foundation for Innovation (CFI), CFI Infrastructure Operating Fund (IOF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates the viability of utilizing Fused Deposition Modeling (FDM) for the fabrication and follow-up testing of a hemispherical resonator (HR). This form of resonator has several significant applications, including the design of vibratory gyroscopes. While traditional high-precision resonators for this application rely on expensive fused-silica fabrication, this study proposes a macro-scale approach using Polylactic Acid (PLA) to enable accessible lab-scale experimentation. The specimens, featuring a unique central-hole mounting configuration, were designed in SolidWorks and analyzed via finite element methods to establish the modal hierarchy. Experimental Modal Analysis (EMA) was conducted using a Laser Doppler Vibrometer (LDV) to acquire vibration signals, which were then analyzed in NVGate, MATLAB, and MEscope to extract natural frequencies and quality factor. Results for a lab-scale HR specimen identified the n = 2 wine-glass mode with a deviation from theoretical natural frequency predictions largely attributed to inherent defects in the fabrication process. Furthermore, a frequency split of 2.15 Hz was observed due to the inherent asymmetries and mass imbalances of the fabrication method. The quality factor was evaluated via the ring-down method and validated using the half-power bandwidth (HPBW) technique. This work demonstrates that 3D-printed resonators serve as an effective, low-cost platform for isolating modal behaviors and optimizing geometric parameters before advancing to micro-scale fabrication.

Schlagwörter

Stichwörter der Autor:innen

3D printingLaser Doppler Vibrometer (LDV)PLAadditive manufacturinghemispherical resonator (HR)modal analysisquality factorvibration testing

Autor:innen und Institutionen

  • Department of Mechanical and Materials Engineering, The University of Western Ontario, London, ON N6A 5B9, Canada.
  • Department of Mechanical Engineering, Benghazi University, Benghazi P.O. Box 1308, Libya.

ORCID-Profile: Ali F Abdulla

Förderung

  • The Natural Science and Engineering Research Council (NSERC)
  • Canada Foundation for Innovation (CFI)
  • CFI Infrastructure Operating Fund (IOF)
  • Ministry of Education and Scientific Research and Benghazi University, Libya
  • Natural Science and Engineering Research Council (NSERC) of Canada discovery
  • Infrastructure Operating Fund

Zitieren

APA

Abdulla, A. F., Ma, J., Bognash, M., & Asokanthan, S. F. (2026). Validating 3D Printing as a Rapid Prototyping Framework for Hemispherical Resonator: Design, Simulation, and Testing. Sensors, 26(12), 3752. https://doi.org/10.3390/s26123752

Vancouver

Abdulla AF, Ma J, Bognash M, Asokanthan SF. Validating 3D Printing as a Rapid Prototyping Framework for Hemispherical Resonator: Design, Simulation, and Testing. Sensors. 2026;26(12):3752. doi:10.3390/s26123752

BibTeX
@article{Abdulla2026,
  author = {Abdulla, Ali F and Ma, Jingning and Bognash, Mohamed and Asokanthan, Samuel F},
  title = {Validating 3D Printing as a Rapid Prototyping Framework for Hemispherical Resonator: Design, Simulation, and Testing},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {12},
  pages = {3752},
  doi = {10.3390/s26123752}
}
Kostenlos starten →