Sensor-Based Differential Flatness-Based Trajectory Tracking Method and Its Application to Wheeled Mobile Robot Control
Sensors · 09.06.2026 · 26 (12) · 3676
DOI: 10.3390/s26123676 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 09.06.2026. Verfasst von Alexander Krasavin und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Digital Technologies and Artificial Intelligence, D. Serikbayev East Kazakhstan Technical University, 19 Serikbayev Street, Ust-Kamenogorsk…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
This article investigates the trajectory tracking control of a differential-drive two-wheeled mobile robot (DDWMR) using its kinematic model, framed in the context of sustainability. A nonlinear-to-linear transformation based on differential flatness is employed to convert the original nonlinear system into two fully decoupled linear subsystems, enabling a simple and robust controller design. Unlike conventional flatness-based methods that rely on exact feedforward linearization around a reference trajectory, the proposed approach performs plant linearization, ensuring reliable tracking across a wide range of trajectories. The resulting two-loop architecture consists of an inner nonlinear loop implementing state prolongation and static feedback and an outer linear controller performing trajectory tracking of the linearized system. Simulation results on a circular reference trajectory demonstrate high tracking accuracy, with a maximum transient deviation of 0.28 m, a settling time of approximately 120 s, and a steady-state mean tracking error below 0.01 m. These results confirm that the plant-linearization-based framework provides accuracy, robustness, and practical applicability for DDWMR trajectory tracking, all within a responsible control environment.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Digital Technologies and Artificial Intelligence, D. Serikbayev East Kazakhstan Technical University, 19 Serikbayev Street, Ust-Kamenogorsk 070010, Kazakhstan.
- Department of System Analysis and Management, L.N. Gumilyov Eurasian National University, Satpayev 2, Astana 010008, Kazakhstan.
- University Research and Innovation Center (EKIK), Obuda University, Bécsi út 96/b, 1034 Budapest, Hungary.
ORCID-Profile: Alexander Krasavin, Gaukhar Nazenova, Adema Dairbekova, Albina Kadyroldina, Tamás Haidegger, Darya Alontseva
Förderung
- Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Krasavin, A., Nazenova, G., Dairbekova, A., Kadyroldina, A., Haidegger, T., & Alontseva, D. (2026). Sensor-Based Differential Flatness-Based Trajectory Tracking Method and Its Application to Wheeled Mobile Robot Control. Sensors, 26(12), 3676. https://doi.org/10.3390/s26123676
Vancouver
Krasavin A, Nazenova G, Dairbekova A, Kadyroldina A, Haidegger T, Alontseva D. Sensor-Based Differential Flatness-Based Trajectory Tracking Method and Its Application to Wheeled Mobile Robot Control. Sensors. 2026;26(12):3676. doi:10.3390/s26123676
BibTeX
@article{Krasavin2026,
author = {Krasavin, Alexander and Nazenova, Gaukhar and Dairbekova, Adema and Kadyroldina, Albina and Haidegger, Tamás and Alontseva, Darya},
title = {Sensor-Based Differential Flatness-Based Trajectory Tracking Method and Its Application to Wheeled Mobile Robot Control},
journal = {Sensors},
year = {2026},
volume = {26},
number = {12},
pages = {3676},
doi = {10.3390/s26123676}
}
EUVIMED