EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dual Band-Pass Filter Based on Split Ring Resonators with Controlled Asymmetric Bandwidth Response

Patricia Castillo-Araníbar iD, Alejandro García Lampérez iD, Daniel Segovia-Vargas iD

Sensors · 02.06.2026 · 26 (11) · 3519

DOI: 10.3390/s26113519 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 02.06.2026. Verfasst von Patricia Castillo-Araníbar und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electric and Electronic Engineering, Universidad Católica San Pablo, Arequipa 04001, Peru. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A synthesis method for compact dual-band bandpass filters based on split-ring resonators (SRRs) is presented. The method combines coupling-matrix synthesis with an energy-based SRR model with a control technique of the center frequencies and the bandwidth ratio (BWR) of the two passbands. The proposed methodology is experimentally validated for prototypes implemented on Rogers RO3010. Although the synthesis procedure is general in formulation, any change of substrate requires re-optimization of the SRR dimensions, couplings, and achievable bandwidth ratio. Two third-order microstrip prototypes were fabricated on Rogers RO3010 (ϵr=10.2, h=0.64 mm) to validate the approach. The first prototype operates at 1.9 and 2.4 GHz with measured −3 dB bandwidths of 200 and 100 MHz, insertion losses of 1.0 and 1.95 dB, and BWR ≈ 0.5. The second prototype operates at 1.9 and 2.4 GHz with measured bandwidths of 100 and 200 MHz, insertion losses of 1.8 and 0.6 dB, and BWR ≈ 1.9. The corresponding footprints are 32 × 12.37 mm2 and 27.87 × 12.42 mm2, respectively. The measured responses agree well with electromagnetic simulations and confirm that asymmetric dual-band bandwidths can be achieved in a compact planar topology without additional reconfigurable elements.

Schlagwörter

Stichwörter der Autor:innen

SRRasymmetric responsemicrowave

Autor:innen und Institutionen

  • Department of Electric and Electronic Engineering, Universidad Católica San Pablo, Arequipa 04001, Peru.
  • Department of Audiovisual Engineering and Communications, Universidad Politécnica de Madrid, 28031 Madrid, Spain.
  • Department of Signal Theory and Communications, Universidad Carlos III de Madrid, 28911 Getafe, Spain.

ORCID-Profile: Patricia Castillo-Araníbar, Alejandro García Lampérez, Daniel Segovia-Vargas

Zitieren

APA

Castillo-Araníbar, P., Lampérez, A. G., & Segovia-Vargas, D. (2026). Dual Band-Pass Filter Based on Split Ring Resonators with Controlled Asymmetric Bandwidth Response. Sensors, 26(11), 3519. https://doi.org/10.3390/s26113519

Vancouver

Castillo-Araníbar P, Lampérez AG, Segovia-Vargas D. Dual Band-Pass Filter Based on Split Ring Resonators with Controlled Asymmetric Bandwidth Response. Sensors. 2026;26(11):3519. doi:10.3390/s26113519

BibTeX
@article{CastilloAranbar2026,
  author = {Castillo-Araníbar, Patricia and Lampérez, Alejandro García and Segovia-Vargas, Daniel},
  title = {Dual Band-Pass Filter Based on Split Ring Resonators with Controlled Asymmetric Bandwidth Response},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {11},
  pages = {3519},
  doi = {10.3390/s26113519}
}
Kostenlos starten →