EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploring Surface Acoustic Waves (SAWs) for Water Quality Sensor’s Anti-Biofouling Application: A New Direction for Acoustic Waves

Asma Akther iD, Tim Malthus iD, Anusuya Willis, Régine Chantler iD, Stephen Gensemer iD, Hendrik Falk iD, Hanne Stang, Charlottle Farnworth, Anu Kumar iD

Sensors · 01.06.2026 · 26 (11) · 3480

DOI: 10.3390/s26113480 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 01.06.2026. Verfasst von Asma Akther und 8 weiteren Autor:innen. Beteiligte Einrichtung: Commonwealth Scientific and Industrial Research Organisation (CSIRO), Melbourne, VIC 3168, Australia. Hauptthemen laut MEDLINE: Biofouling, Water Quality, Sound, Acoustics. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biofouling presents numerous challenges across various sectors, including aquaculture, agriculture, infrastructure, and medicine. The development of anti-biofouling techniques remains a significant challenge. In the water industry, biofouling on monitoring sensors substantially compromises the accuracy of measurements by interfering with the sensors’ measuring ability. Biofouling also significantly increases the running costs by increasing the frequency of maintenance needed to keep sensors clean and accurate. Consequently, anti-biofouling techniques are widely employed to clean in situ optical sensors, ensuring accurate measurements while minimizing overall system costs. The conventional approach for preventing biofouling from in situ sensors typically involves the application of coatings, mechanical brushes, ultraviolet radiation, and ultrasonic waves, which possess distinct advantages and disadvantages contingent upon their application. The challenges associated with protecting the small windows of water quality sensors from biofouling over extended periods using current methods are either expensive or adversely affect the integrity of monitoring data. This study introduces a low-cost centimeter-scale high-frequency surface acoustic wave (SAW) device to protect the small windows of in situ water quality sensors continuously from biofouling, functioning as an auxiliary anti-biofouling mechanism. This study found that this 16 MHz SAW device can mitigate the formation of biofilms by adhesive diatom strains CS-1664, CS-1665, and by planktonic algae CS-327 by approximately 98% in comparison to control conditions, functioning effectively as an anti-biofouling tool for itself and surrounding surfaces without adversely affecting aquatic organisms. The dimension and resonance frequency (RF) of the SAW device are also capable of being fabricated according to the area requiring cleaning. A miniaturized 16 MHz SAW device can sustain operation for prolonged periods up to a couple of months without maintenance, at a low cost and power consumption, providing a new anti-biofouling technology. This methodology aims to assist the Australian inland and coastal water quality monitoring system by reducing maintenance costs while simultaneously enhancing the longevity of sensors submerged in water for extended periods.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BiofoulingWater QualitySoundAcousticsEnvironmental MonitoringBiosensing Techniques

Stichwörter der Autor:innen

algaeanti-biofoulinginland watersensorssound propagation acoustic fieldsurface acoustic waves (SAWs)vibrationwater quality monitoring

Autor:innen und Institutionen

  • Commonwealth Scientific and Industrial Research Organisation (CSIRO), Melbourne, VIC 3168, Australia.

ORCID-Profile: Asma Akther, Tim Malthus, Régine Chantler, Stephen Gensemer, Hendrik Falk, Anu Kumar

Zitieren

APA

Akther, A., Malthus, T., Willis, A., Chantler, R., Gensemer, S., Falk, H., Stang, H., Farnworth, C., & Kumar, A. (2026). Exploring Surface Acoustic Waves (SAWs) for Water Quality Sensor’s Anti-Biofouling Application: A New Direction for Acoustic Waves. Sensors, 26(11), 3480. https://doi.org/10.3390/s26113480

Vancouver

Akther A, Malthus T, Willis A, Chantler R, Gensemer S, Falk H, et al. Exploring Surface Acoustic Waves (SAWs) for Water Quality Sensor’s Anti-Biofouling Application: A New Direction for Acoustic Waves. Sensors. 2026;26(11):3480. doi:10.3390/s26113480

BibTeX
@article{Akther2026,
  author = {Akther, Asma and Malthus, Tim and Willis, Anusuya and Chantler, Régine and Gensemer, Stephen and Falk, Hendrik and Stang, Hanne and Farnworth, Charlottle and Kumar, Anu},
  title = {Exploring Surface Acoustic Waves (SAWs) for Water Quality Sensor’s Anti-Biofouling Application: A New Direction for Acoustic Waves},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {11},
  pages = {3480},
  doi = {10.3390/s26113480}
}
Kostenlos starten →