End-Effector Technologies for Fruit Harvesting Robots: A Review of Structures, Actuation, and Field Deployability
Sensors · 26.05.2026 · 26 (11) · 3382
DOI: 10.3390/s26113382 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 26.05.2026. Verfasst von Senming Zhong und 6 weiteren Autor:innen. Beteiligte Einrichtung: Industrial Training Centre, Guangdong Polytechnic Normal University, Guangzhou 510665, China. Hauptthemen laut MEDLINE: Robotics, Agriculture, Fruit. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 118 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Areas Research and Development Projects of Huizhou, Special projects in universities' key fields of Guangdong Province, Scientific Research Platforms and Projects of the University of Guangdong Province.
Abstract (Originalsprache)
This review summarizes the research on the end effectors of agricultural harvesting robots (2010–2025) and extracts two core design principles. First of all, the selection of end effectors must follow the biological characteristics of fruits: rigid grippers are suitable for hard skinned and regular fruits; soft grippers can reduce the damage of fragile crops to a certain extent; suction cups are suitable for smooth, barrier free surfaces; the envelope type is suitable for soft and lossless picking scenes; the combined suction and grip design is more suitable for unstructured environments. Secondly, the separation mode should match the characteristics of the stem: motion separation (torsion/pull) is suitable for weak stems, while cutting is mainly used for hard stems. Unlike previous literature, this review provides a field deployability checklist (including dust/water proofing, cleanliness, maintenance, aging prevention, and aspiration prevention) to narrow the results of the laboratory and the real field environment. The three future directions of multimodal perception, variable stiffness driving and reinforcement learning are logically related to the analysis in this paper: multimodal perception optimizes the perception limit, variable stiffness solves the rigid–flexible trade-off, and reinforcement learning provides adaptive strategies for different crops. This framework can match the end effector design with the crop-specific field conditions.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Industrial Training Centre, Guangdong Polytechnic Normal University, Guangzhou 510665, China.
- School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China.
- College of Computer Science and Engineering, Chongqing University of Technology, Chongqing 400054, China.
ORCID-Profile: Senming Zhong, Liancai Shen
Förderung
- Key Areas Research and Development Projects of Huizhou
- Special projects in universities' key fields of Guangdong Province
- Scientific Research Platforms and Projects of the University of Guangdong Province
Zitieren
APA
Zhong, S., Shu, C., Shen, L., Wu, Z., Xue, M., Wang, X., & Zhu, W. (2026). End-Effector Technologies for Fruit Harvesting Robots: A Review of Structures, Actuation, and Field Deployability. Sensors, 26(11), 3382. https://doi.org/10.3390/s26113382
Vancouver
Zhong S, Shu C, Shen L, Wu Z, Xue M, Wang X, et al. End-Effector Technologies for Fruit Harvesting Robots: A Review of Structures, Actuation, and Field Deployability. Sensors. 2026;26(11):3382. doi:10.3390/s26113382
BibTeX
@article{Zhong2026,
author = {Zhong, Senming and Shu, Chen and Shen, Liancai and Wu, Zhangjun and Xue, Minglong and Wang, Xiaojun and Zhu, Weiwei},
title = {End-Effector Technologies for Fruit Harvesting Robots: A Review of Structures, Actuation, and Field Deployability},
journal = {Sensors},
year = {2026},
volume = {26},
number = {11},
pages = {3382},
doi = {10.3390/s26113382}
}
EUVIMED