Rotor Attitude Estimation for Spherical Motors Using Geometry-Constrained Kalman Transformer Algorithm in Monocular Vision
Sensors · 16.05.2026 · 26 (10) · 3156
DOI: 10.3390/s26103156 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 16.05.2026. Verfasst von Fucong Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Tianjin University of Technology and Education, Tianjin 300222, China. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tianjin Municipal Science and Technology Commission, Tianjin Administration for Market Regulation.
Abstract (Originalsprache)
Permanent-magnet spherical motors (PMSpMs) possess three-degree-of-freedom omnidirectional motion characteristics, and rotor attitude estimation (RAE) is essential for closed-loop control. This article proposes a visual RAE method for spherical motors using a Kalman filter and geometric constraint Transformer (GK-TransT). An RAE system was equipped with a monocular area scan camera with a visual feature component (VFC) mounted on the bottom of the rotor. In the proposed GK-TransT algorithm, the Kalman filter is used to enhance the robustness and accuracy of the TransT tracker. To verify the algorithm, a tracking comparison was conducted among the GK-TransT, original TransT, KCF, and CSRT algorithms. The results indicate that the tracking precisions of the proposed GK-TransT algorithm for the main and auxiliary feature points reach 90.9% and 94.4%, respectively, with an average processing speed of 61.23 FPS and a single-frame latency of 16.33 ms. Considering the tracking precision, real-time performance, and robustness under occlusion and motion blur conditions, the GK-TransT algorithm is more applicable for the RAE of the PMSpM. In addition, an RAE test bench was developed, and the GK-TransT-based method and a micro-electro-mechanical system (MEMS) sensor were compared. The physical ground truth of a hydraulic rotary table was used as the benchmark. The comparison results indicate that the GK-TransT-based method achieves a higher accuracy than the MEMS method. Finally, the practicability of the proposed method is proved.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Tianjin University of Technology and Education, Tianjin 300222, China.
- Tianjin Intelligent Robot Technology and Application Enterprise Key Laboratory, Tianjin 300222, China.
- Tianjin BestBond (Baishibingde) Intelligent Technology Co., Ltd., Tianjin 300300, China.
Förderung
- Tianjin Municipal Science and Technology Commission
- Tianjin Administration for Market Regulation
Zitieren
APA
Liu, F., Tian, B., Wen, F., Yu, L., Yu, T., & Li, M. (2026). Rotor Attitude Estimation for Spherical Motors Using Geometry-Constrained Kalman Transformer Algorithm in Monocular Vision. Sensors, 26(10), 3156. https://doi.org/10.3390/s26103156
Vancouver
Liu F, Tian B, Wen F, Yu L, Yu T, Li M. Rotor Attitude Estimation for Spherical Motors Using Geometry-Constrained Kalman Transformer Algorithm in Monocular Vision. Sensors. 2026;26(10):3156. doi:10.3390/s26103156
BibTeX
@article{Liu2026,
author = {Liu, Fucong and Tian, Baokaidi and Wen, Faqiang and Yu, Lei and Yu, Tianxiang and Li, Min},
title = {Rotor Attitude Estimation for Spherical Motors Using Geometry-Constrained Kalman Transformer Algorithm in Monocular Vision},
journal = {Sensors},
year = {2026},
volume = {26},
number = {10},
pages = {3156},
doi = {10.3390/s26103156}
}
EUVIMED