A Highly Sensitive ppb-Level H2 Gas Sensor Based on Pt/PtO and Pd/PdOx Co-Decorated WO3 Nanofibers Prepared by Electrospinning
Sensors · 13.05.2026 · 26 (10) · 3079
DOI: 10.3390/s26103079 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 13.05.2026. Verfasst von Zhipeng Tang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Functional Molecules and Materials, School of Physics and Optoelectronic Engineering, Shandong University of Technology, 266 Xincun Xi …. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 98 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province, Natural Science Foundation of Shandong Province, China.
Abstract (Originalsprache)
A highly sensitive ppb-level resistive H2 gas sensor was fabricated based on Pt/PtO and Pd/PdOx co-decorated WO3 nanofibers prepared via electrospinning and calcination. The optimized sensor based on 2 at% Pt–2 at% Pd co-decorated WO3 nanofibers exhibited reliable detection toward 100 ppb H2 at an optimized operating temperature of 170 °C. Upon 2 at% Pd decoration, the response of the WO3-based sensor increased from 1, corresponding to almost no response, to 55 (Ra/Rg) toward 100 ppm H2. Further introduction of 2 at% Pt reduced the optimal operating temperature of the 2 at% Pd-decorated WO3-based sensor from 200 °C to 170 °C and enhanced the response by approximately twofold. The optimal sensor exhibits excellent linear response characteristics, high selectivity, good response repeatability, and long-term operational stability. The enhanced sensing performance is attributed to the catalytic capability and possible spillover-related effects of Pd/PdOx and Pt/PtO toward H2/O2, as well as depletion-layer modulation induced by the heterostructures between Pt/PtO and WO3, and Pd/PdOx and WO3. These synergistic catalytic and electronic sensitization effects collectively contribute to the high sensitivity toward H2. These results indicate that the proposed resistive H2 sensor holds significant potential for practical hydrogen-sensing applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory of Functional Molecules and Materials, School of Physics and Optoelectronic Engineering, Shandong University of Technology, 266 Xincun Xi Road, Zibo 255000, China.
ORCID-Profile: Qingkuan Meng, Qiang Jing
Förderung
- Natural Science Foundation of Shandong Province
- Natural Science Foundation of Shandong Province, China
Zitieren
APA
Tang, Z., Wang, J., Zhang, L., Li, Q., Yang, C., Pang, Y., Yang, Y., Chen, J., Meng, Q., & Jing, Q. (2026). A Highly Sensitive ppb-Level H2 Gas Sensor Based on Pt/PtO and Pd/PdOx Co-Decorated WO3 Nanofibers Prepared by Electrospinning. Sensors, 26(10), 3079. https://doi.org/10.3390/s26103079
Vancouver
Tang Z, Wang J, Zhang L, Li Q, Yang C, Pang Y, et al. A Highly Sensitive ppb-Level H2 Gas Sensor Based on Pt/PtO and Pd/PdOx Co-Decorated WO3 Nanofibers Prepared by Electrospinning. Sensors. 2026;26(10):3079. doi:10.3390/s26103079
BibTeX
@article{Tang2026,
author = {Tang, Zhipeng and Wang, Jinshun and Zhang, Lixin and Li, Qiuxia and Yang, Chen and Pang, Yuhao and Yang, Yingying and Chen, Jingwei and Meng, Qingkuan and Jing, Qiang},
title = {A Highly Sensitive ppb-Level H2 Gas Sensor Based on Pt/PtO and Pd/PdOx Co-Decorated WO3 Nanofibers Prepared by Electrospinning},
journal = {Sensors},
year = {2026},
volume = {26},
number = {10},
pages = {3079},
doi = {10.3390/s26103079}
}
EUVIMED