EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

DB-LIO: Database-Driven LiDAR–Inertial Odometry for Memory-Bounded Persistent Mapping

Hun-Hee Kim iD, Ho-Hyun Kang iD, Dong-Hee Noh iD, Hea-Min Lee iD

Sensors · 12.05.2026 · 26 (10) · 3061

DOI: 10.3390/s26103061 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 12.05.2026. Verfasst von Hun-Hee Kim und 3 weiteren Autor:innen. Beteiligte Einrichtung: AI Application Research Center, Korea Electronics Technology Institute (KETI), Jeonju 54853, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Korea Forest Service, Korea Institute of Planning and Evaluation for Technology in Food, Agriculture, Forestry and Fisheries.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes DB-LIO (database-driven LiDAR-inertial odometry), a simultaneous localization and mapping (SLAM) system that addresses memory scalability challenges in extended autonomous operation. Existing LiDAR-SLAM systems accumulate keyframe history in memory, leading to O(N) growth and out-of-memory failures during extended operation. To overcome this limitation, DB-LIO introduces three core design elements. First, it proposes a spatially indexed keyframe management scheme that persistently stores keyframes in SQLite with R-Tree spatial indexing, enabling O(logN+k) spatial queries that tightly couple cache eviction with factor-graph optimization requirements—a design that ensures every keyframe potentially involved in the next optimization cycle resides in cache. Second, it presents a four-level memory bounding architecture—SLAM-engine keyframe trimming with transparent on-demand reloading, a DB-level least recently used (LRU) cache with a spatial active window, Scan Context descriptor pool bounding, and iSAM2 sliding window compaction with a sparse global anchor graph—that collectively bounds the dominant memory consumers to O(C). Third, the DB-based persistent storage enables a localization mode that can reload previously built maps—including full point clouds, six-degree-of-freedom poses, timestamps, and inter-keyframe relationships—and perform pose estimation using the stored map, which is particularly valuable for agricultural robots and other autonomous systems requiring map reuse. Experiments on a custom orchard dataset demonstrate an 81.9% reduction in memory usage compared with that of the in-memory baseline (2888 MB → 524 MB), while preserving equivalent trajectory accuracy (absolute trajectory error (ATE) root mean square error (RMSE) 0.305 ± 0.001 m vs. 0.296 m). Validation on the KITTI odometry benchmark confirms that the proposed localization mode generalizes across different LiDAR types (Livox Mid360, Velodyne HDL-64E) and environments (orchard, urban driving).

Schlagwörter

Stichwörter der Autor:innen

LRU cacheLiDAR-SLAMROS2factor graph optimizationmemory managementsliding windowspatial indexing

Autor:innen und Institutionen

  • AI Application Research Center, Korea Electronics Technology Institute (KETI), Jeonju 54853, Republic of Korea.
  • Division of Electronic Engineering, Jeonbuk National University, Jeonju 54896, Republic of Korea.

ORCID-Profile: Hun-Hee Kim, Ho-Hyun Kang, Dong-Hee Noh, Hea-Min Lee

Förderung

  • Ministry of Trade, Industry and Energy
  • Korea Forest Service
  • Korea Institute of Planning and Evaluation for Technology in Food, Agriculture, Forestry and Fisheries
  • Ministry of Trade, Industry & Energy
  • Ministry of Agriculture, Food and Rural Affairs

Zitieren

APA

Kim, H. H., Kang, H. H., Noh, D. H., & Lee, H. M. (2026). DB-LIO: Database-Driven LiDAR–Inertial Odometry for Memory-Bounded Persistent Mapping. Sensors, 26(10), 3061. https://doi.org/10.3390/s26103061

Vancouver

Kim HH, Kang HH, Noh DH, Lee HM. DB-LIO: Database-Driven LiDAR–Inertial Odometry for Memory-Bounded Persistent Mapping. Sensors. 2026;26(10):3061. doi:10.3390/s26103061

BibTeX
@article{Kim2026,
  author = {Kim, Hun-Hee and Kang, Ho-Hyun and Noh, Dong-Hee and Lee, Hea-Min},
  title = {DB-LIO: Database-Driven LiDAR–Inertial Odometry for Memory-Bounded Persistent Mapping},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {10},
  pages = {3061},
  doi = {10.3390/s26103061}
}
Kostenlos starten →