Mechanical Property Evolution and Load Monitoring Method of Laminated Elastomeric Bridge Bearings Under Temperature Effects
Sensors · 12.05.2026 · 26 (10) · 3046
DOI: 10.3390/s26103046 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 12.05.2026. Verfasst von Menglong He und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Architectural, Guangxi University of Science and Technology, Liuzhou 545006, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Academy of Sciences.
Abstract (Originalsprache)
The mechanical behavior of laminated elastomeric bearings in service is highly sensitive to ambient temperature, whereas conventional monitoring approaches often fail to accurately capture their temperature-dependent load response. To address this issue, this study proposes a multi-temperature framework for identification and load monitoring of bridge elastomeric bearings. Using a high-precision laser displacement measurement system, six temperature levels were defined from −20 to 30 °C at 10 °C intervals. Room-temperature load–displacement calibration tests, compressive elastic modulus tests under different temperature conditions, and monitoring accuracy validation tests were then systematically conducted. Based on these experiments, the effects of temperature on the mechanical properties and compressive deformation response of the bearing were quantified, and an inverse load-identification model was developed. The results show that the compressive elastic modulus increases markedly with decreasing temperature, reaching a 32.11% increase at −20 °C relative to that at 30 °C. Under the same applied load, the vertical compressive deformation decreases significantly as temperature decreases, with a 27.76% reduction at −20 °C compared with that at 30 °C, indicating a pronounced low-temperature stiffening effect. The proposed inverse load-identification model achieves a maximum relative error of 4.83% over the full temperature range, demonstrating good accuracy and applicability. The proposed methodology provides a practical basis for mechanical-performance evaluation and high-precision monitoring of bridge bearings under complex thermal environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Civil and Architectural, Guangxi University of Science and Technology, Liuzhou 545006, China.
- School of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China.
ORCID-Profile: Nianchun Deng
Förderung
- Guangxi Academy of Sciences
Zitieren
APA
He, M., Liu, X., & Deng, N. (2026). Mechanical Property Evolution and Load Monitoring Method of Laminated Elastomeric Bridge Bearings Under Temperature Effects. Sensors, 26(10), 3046. https://doi.org/10.3390/s26103046
Vancouver
He M, Liu X, Deng N. Mechanical Property Evolution and Load Monitoring Method of Laminated Elastomeric Bridge Bearings Under Temperature Effects. Sensors. 2026;26(10):3046. doi:10.3390/s26103046
BibTeX
@article{He2026,
author = {He, Menglong and Liu, Xianhui and Deng, Nianchun},
title = {Mechanical Property Evolution and Load Monitoring Method of Laminated Elastomeric Bridge Bearings Under Temperature Effects},
journal = {Sensors},
year = {2026},
volume = {26},
number = {10},
pages = {3046},
doi = {10.3390/s26103046}
}
EUVIMED