EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Mold Design and Molding Conditions on the Optical Properties of Contact Lenses

Kazumasa Tatsumi iD, Kentaro Saeki iD, Shin Kubota, Yoshikatsu Kaneda, Kenji Uno, Kazuhiko Ohnuma iD, Tatsuo Shiina

Sensors · 10.05.2026 · 26 (10) · 3007

DOI: 10.3390/s26103007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 10.05.2026. Verfasst von Kazumasa Tatsumi und 6 weiteren Autor:innen. Beteiligte Einrichtung: SEED Co., Ltd., 2-40-2 Hongo, Bunkyo-ku, Tokyo 113-8402, Japan. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Injection molding is essential for mass-producing soft contact lenses, yet molding-induced deformation remains a decisive factor for optical quality. This study systematically evaluated the impact of resin mold design factors (optical zone (OZ) radius of curvature and resin mold thickness) and injection molding parameters (holding pressure and injection speed) on the properties of a dry-state lens (dry lens) using an L18 orthogonal array. The results demonstrated that optimizing the resin mold thickness to 0.9 mm reduced astigmatism by approximately 95%, while high holding pressure and low injection speed improved structural stability. Notably, the findings suggest that the refractive power of the dry lens is more strongly governed by macro-level curvature fluctuations and internal stress distributions arising from the resin mold thickness and shape than by the wavefront aberrations of the resin mold itself. Designs with a smaller radius of curvature (R = 6.5 mm) exhibited substantial power deviations of up to +2.8 D, whereas deviations remained within ±0.2 D for designs with a larger radius of curvature (R = 8.5 mm). For high-precision lens manufacturing, it is indispensable to incorporate a resin mold design that accounts for deformations induced during molding. This study provides comprehensive guidelines for achieving high-quality products by detailing the relationship between injection molding and design.

Schlagwörter

Stichwörter der Autor:innen

contact lensesinjection moldingresin mold

Autor:innen und Institutionen

  • SEED Co., Ltd., 2-40-2 Hongo, Bunkyo-ku, Tokyo 113-8402, Japan.
  • Graduate School of Science and Engineering, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522, Chiba, Japan.
  • Laboratorio de Lente Verde, 98-1 Nozomino, Sodegaura 299-0251, Chiba, Japan.

ORCID-Profile: Kazumasa Tatsumi, Kentaro Saeki, Kazuhiko Ohnuma

Zitieren

APA

Tatsumi, K., Saeki, K., Kubota, S., Kaneda, Y., Uno, K., Ohnuma, K., & Shiina, T. (2026). Influence of Mold Design and Molding Conditions on the Optical Properties of Contact Lenses. Sensors, 26(10), 3007. https://doi.org/10.3390/s26103007

Vancouver

Tatsumi K, Saeki K, Kubota S, Kaneda Y, Uno K, Ohnuma K, et al. Influence of Mold Design and Molding Conditions on the Optical Properties of Contact Lenses. Sensors. 2026;26(10):3007. doi:10.3390/s26103007

BibTeX
@article{Tatsumi2026,
  author = {Tatsumi, Kazumasa and Saeki, Kentaro and Kubota, Shin and Kaneda, Yoshikatsu and Uno, Kenji and Ohnuma, Kazuhiko and Shiina, Tatsuo},
  title = {Influence of Mold Design and Molding Conditions on the Optical Properties of Contact Lenses},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {10},
  pages = {3007},
  doi = {10.3390/s26103007}
}
Kostenlos starten →