Smartphone Sensor Battery Consumption: A Standardized and Reproducible Test Protocol
Sensors · 07.05.2026 · 26 (10) · 2923
DOI: 10.3390/s26102923 ↗Kurz gefasst
Studienprotokoll in der Zeitschrift Sensors, online erschienen am 07.05.2026. Verfasst von Florian Schweizer und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Digital Medicine, University Hospital Bonn, University of Bonn, 53127 Bonn, Germany. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Forschung, Technologie und Raumfahrt.
Abstract (Originalsprache)
We present a low-cost, fully reproducible software and hardware protocol for smartphone sensor battery cost tests. Our pipeline combines a rigorous hardware checklist and light-sealed enclosure, a software checklist for iOS devices, and a BatteryTest app to control sensor configurations and log battery state during tests. Methodologically, we applied this standardized protocol in 30 independent analyzed test runs using six iPhone 14 Pro and three iPhone 13 Pro devices, and compared battery-life outcomes across predefined sensor conditions (idle, TrueDepth, GPS, accelerometer, pedometer, gyroscope, and rear camera), sampling rates, and sensor-specific settings. Key findings include: (i) Baseline battery life was approximately 10% higher on the 14 Pro versus the 13 Pro models under idle conditions. Sensor activation substantially reduced battery life, with GPS and camera usage exhibiting the strongest impact. (ii) Software parameters matter: the sampling rate change from 27 s to 3 s led to significantly decreased battery life in several scenarios, while reducing the location accuracy in GPS tests increased battery life by up to 20 h on the 13 Pro devices. (iii) Cross-device-generation consistency is heterogeneous. The iPhone 14 Pro lasts up to 50% longer on GPS tests, yet drains about an hour faster than the 13 Pro in camera tests. This work introduces the first standardized, and fully reproducible protocol for quantifying sensor-specific battery consumption on iPhones, enabling consistent, comparable, and low-cost energy benchmarking across device generations.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Digital Medicine, University Hospital Bonn, University of Bonn, 53127 Bonn, Germany.
- TUM School of Computation, Information, and Technology, Technical University Munich, 85748 Garching near Munich, Germany.
ORCID-Profile: Florian Schweizer, Joe Yu, Elena Mille, Lara Marie Reimer, Maximilian Kapsecker, Jens Klinker, Stephan Jonas
Förderung
- Bundesministerium für Forschung, Technologie und Raumfahrt
Zitieren
APA
Schweizer, F., Yu, J., Mille, E., Reimer, L. M., Kapsecker, M., Klinker, J., & Jonas, S. (2026). Smartphone Sensor Battery Consumption: A Standardized and Reproducible Test Protocol. Sensors, 26(10), 2923. https://doi.org/10.3390/s26102923
Vancouver
Schweizer F, Yu J, Mille E, Reimer LM, Kapsecker M, Klinker J, et al. Smartphone Sensor Battery Consumption: A Standardized and Reproducible Test Protocol. Sensors. 2026;26(10):2923. doi:10.3390/s26102923
BibTeX
@article{Schweizer2026,
author = {Schweizer, Florian and Yu, Joe and Mille, Elena and Reimer, Lara Marie and Kapsecker, Maximilian and Klinker, Jens and Jonas, Stephan},
title = {Smartphone Sensor Battery Consumption: A Standardized and Reproducible Test Protocol},
journal = {Sensors},
year = {2026},
volume = {26},
number = {10},
pages = {2923},
doi = {10.3390/s26102923}
}
EUVIMED