EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Fast and Efficient Method for Radiation Pattern Prediction in Large-Scale Tightly Coupled Linear Antenna Arrays

Jianshu Wei, Peng Xu iD, Haitao Lu, Xiao Cai iD

Sensors · 30.04.2026 · 26 (9) · 2795

DOI: 10.3390/s26092795 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 30.04.2026. Verfasst von Jianshu Wei und 3 weiteren Autor:innen. Beteiligte Einrichtung: Research Center of Applied Electromagnetics, Nanjing University of Information Science and Technology, Nanjing 210044, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory of Millimeter Waves, Jiangsu Institute of Education, Nanjing University of Information Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reliable and fast radiation pattern prediction is critical for large-scale tightly coupled linear antenna arrays. Strong mutual coupling and finite-array edge effects limit the accuracy of conventional array factor methods, while full-wave simulations become computationally prohibitive for large arrays. To address this issue, a fast and efficient radiation pattern prediction method (FERPP) is proposed. For central elements, the far-field response is obtained from a calibrated reference array and extended through position-dependent phase compensation. For edge elements, responses are extracted from independent local full-wave simulations. All element responses are assembled into a global far-field response matrix, enabling direct radiation pattern synthesis using the extended method of maximum power transmission efficiency. Simulation results obtained with a 1024-element linear microstrip patch antenna array operating at 3.5 GHz, with small inter-element spacing, demonstrate close agreement with full-wave simulations. For a broadside single-beam case, the predicted peak gain is 29.10 dBi, compared with 29.02 dBi from full-wave simulation. For a scanned beam at 30°, the predicted peak gain is 28.22 dBi, while the full-wave result is 28.99 dBi. For an equal-weight three-beam configuration at −30°, 0°, and 30°, the proposed method yields a peak gain of 23.87 dBi, compared with 24.21 dBi from full-wave simulation. In terms of computational efficiency, the proposed method requires only about 1.8% of the computational time required for a full-wave simulation. These results demonstrate that the proposed FERPP method provides a practical and efficient solution for radiation pattern prediction and beamforming analysis of large-scale tightly coupled linear antenna arrays.

Schlagwörter

Stichwörter der Autor:innen

beamformingfast simulationlarge-scale antenna arraysradiation pattern predictiontightly coupled arrays

Autor:innen und Institutionen

  • Research Center of Applied Electromagnetics, Nanjing University of Information Science and Technology, Nanjing 210044, China.
  • School of Information Engineering, Jiangsu Maritime Institute, Nanjing 211199, China.
  • Nanjing Huihai Transportation Technology Co., Ltd., Nanjing 210036, China.

ORCID-Profile: Peng Xu, Xiao Cai

Förderung

  • State Key Laboratory of Millimeter Waves
  • Jiangsu Institute of Education
  • Nanjing University of Information Science and Technology
  • National Natural Science Foundation of China

Zitieren

APA

Wei, J., Xu, P., Lu, H., & Cai, X. (2026). A Fast and Efficient Method for Radiation Pattern Prediction in Large-Scale Tightly Coupled Linear Antenna Arrays. Sensors, 26(9), 2795. https://doi.org/10.3390/s26092795

Vancouver

Wei J, Xu P, Lu H, Cai X. A Fast and Efficient Method for Radiation Pattern Prediction in Large-Scale Tightly Coupled Linear Antenna Arrays. Sensors. 2026;26(9):2795. doi:10.3390/s26092795

BibTeX
@article{Wei2026,
  author = {Wei, Jianshu and Xu, Peng and Lu, Haitao and Cai, Xiao},
  title = {A Fast and Efficient Method for Radiation Pattern Prediction in Large-Scale Tightly Coupled Linear Antenna Arrays},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {9},
  pages = {2795},
  doi = {10.3390/s26092795}
}
Kostenlos starten →