Design and Research of Intelligent Bearing Magnetic Coupling Piezoelectric–Triboelectric Composite Rotary Energy Harvester
Sensors · 29.04.2026 · 26 (9) · 2778
DOI: 10.3390/s26092778 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 29.04.2026. Verfasst von Heng Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Nantong University, Nantong 226019, China. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: General Program of National Natural Science Foundation of Nantong, Nantong Municipal Bureau of Science and Technology.
Abstract (Originalsprache)
To address the issue of insufficient output voltage of the self-powered unit of intelligent bearings under low-amplitude working conditions, a piezoelectric–friction composite energy harvester driven by rotating magnetic force is proposed based on the multi-physical field coupling and synergy of magnetoelectric, piezoelectric and triboelectric effects, which effectively enhances the voltage output in low-amplitude vibration environments. The intelligent bearing adopts an extended structure, consisting of an outer ring sleeve, an inner ring extension ring, magnetic poles and a composite energy harvester. The outer ring sleeve is nested on the outer ring of the bearing and fixes the composite energy harvester, while the inner ring extension ring is fixed on the inner ring of the bearing and installs the magnetic poles. The composite energy harvester adopts a magnetic double-mass block single-crystal piezoelectric simply supported beam structure and integrates a contact-separation type triboelectric nanogenerator in the vibration direction, achieving the collaborative power supply of the piezoelectric and triboelectric units. A mechanical-electrical coupling dynamic model of the composite energy harvester is developed. Using COMSOL software, the effects of various structural dimensions and magnetic pole configurations on the output voltage are analyzed. Experimental validation confirms the model’s effectiveness. The results demonstrate that the energy harvester operates effectively under varying bearing rotational speeds. The rotational speed of the magnetic poles has little influence on the output voltage amplitude but primarily affects its frequency. Under the condition that the rotational speed is within 600 r/min, the piezoelectric module stably outputs a peak voltage of approximately 16.6 V, and the triboelectric unit stably outputs a peak voltage of approximately 4.4 V, which can effectively meet the self-driving requirements of intelligent bearings.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Nantong University, Nantong 226019, China.
- Faculty of Science and Technology, Electromechanical Engineering, University of Macau, Macau 999078, China.
- Equipment Management and Unmanned Aerial Vehicle Engineering School, Air Force Engineering University, Xi'an 710051, China.
Förderung
- General Program of National Natural Science Foundation of Nantong
- Nantong Municipal Bureau of Science and Technology
Zitieren
APA
Wang, H., Sun, W., Li, Z., Zhu, L., Zhu, Y., & Wang, H. (2026). Design and Research of Intelligent Bearing Magnetic Coupling Piezoelectric–Triboelectric Composite Rotary Energy Harvester. Sensors, 26(9), 2778. https://doi.org/10.3390/s26092778
Vancouver
Wang H, Sun W, Li Z, Zhu L, Zhu Y, Wang H. Design and Research of Intelligent Bearing Magnetic Coupling Piezoelectric–Triboelectric Composite Rotary Energy Harvester. Sensors. 2026;26(9):2778. doi:10.3390/s26092778
BibTeX
@article{Wang2026,
author = {Wang, Heng and Sun, Wanru and Li, Zifei and Zhu, Liucheng and Zhu, Yuxuan and Wang, Haocheng},
title = {Design and Research of Intelligent Bearing Magnetic Coupling Piezoelectric–Triboelectric Composite Rotary Energy Harvester},
journal = {Sensors},
year = {2026},
volume = {26},
number = {9},
pages = {2778},
doi = {10.3390/s26092778}
}
EUVIMED