EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Multi-Indicator Fusion-Based Technique for the Identification of Acoustic Emission Signals During Rock Failure

Dexian Li, Hongwei Wang iD, Dengyu Wang, Xuemei Wang, Lianhui Li, Zhongwei Pei, Ying Wang

Sensors · 29.04.2026 · 26 (9) · 2759

DOI: 10.3390/s26092759 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 29.04.2026. Verfasst von Dexian Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Nickel and Cobalt Associated Minerals Resources Development and Comprehensive Utilization, Jinchang 737100, China. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Central South University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the widespread application of acoustic emission (AE) technology in geotechnical engineering, effectively separating and identifying dense AE signals generated during rock fracturing remains a critical challenge. This study proposes an AE event identification technique based on waveform energy envelopes and multi-indicator characteristic parameters. First, the waveform energy envelope is used to adaptively segment dense and partially overlapping AE waveforms without relying on fixed timing parameters. Then, a template sliding-window scan integrating waveform correlation, ring count, rise time, and signal energy is performed to identify candidate AE events. In addition, a time-difference correction and window-stacking strategy is adopted to improve multi-channel arrival picking. Experimental validation on representative single-peak single-event and double-peak multi-waveform cases extracted from laboratory rock-failure tests demonstrates that the proposed method can effectively separate and identify AE waveforms under the tested conditions. Compared with conventional timing-parameter-based segmentation and correlation-dominated matching, the proposed workflow is more robust to waveform attenuation and distortion. The method provides a methodological basis for AE waveform identification and arrival-time extraction in rock-failure monitoring and has potential to support early warning after further validation.

Schlagwörter

Stichwörter der Autor:innen

acoustic emissionarrival-time correctionwaveform segmentation

Autor:innen und Institutionen

  • National Key Laboratory of Nickel and Cobalt Associated Minerals Resources Development and Comprehensive Utilization, Jinchang 737100, China.
  • School of Resources and Safety Engineering, Central South University, Changsha 410083, China.

ORCID-Profile: Hongwei Wang

Förderung

  • Central South University

Zitieren

APA

Li, D., Wang, H., Wang, D., Wang, X., Li, L., Pei, Z., & Wang, Y. (2026). A Multi-Indicator Fusion-Based Technique for the Identification of Acoustic Emission Signals During Rock Failure. Sensors, 26(9), 2759. https://doi.org/10.3390/s26092759

Vancouver

Li D, Wang H, Wang D, Wang X, Li L, Pei Z, et al. A Multi-Indicator Fusion-Based Technique for the Identification of Acoustic Emission Signals During Rock Failure. Sensors. 2026;26(9):2759. doi:10.3390/s26092759

BibTeX
@article{Li2026,
  author = {Li, Dexian and Wang, Hongwei and Wang, Dengyu and Wang, Xuemei and Li, Lianhui and Pei, Zhongwei and Wang, Ying},
  title = {A Multi-Indicator Fusion-Based Technique for the Identification of Acoustic Emission Signals During Rock Failure},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {9},
  pages = {2759},
  doi = {10.3390/s26092759}
}
Kostenlos starten →