EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimizing Sensor Number and Placement for Accurate and Robust Center of Pressure Estimation on Instrumented Insoles

Matthis Gautier iD, Fabien Parrain iD, Pierre-Yves Joubert iD

Sensors · 28.04.2026 · 26 (9) · 2723

DOI: 10.3390/s26092723 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 28.04.2026. Verfasst von Matthis Gautier und 2 weiteren Autor:innen. Beteiligte Einrichtung: Centre de Nanosciences et de Nanotechnologies, Centre National de la Recherche Scientifique, Université Paris-Saclay, 91120 Palaiseau, France. Hauptthemen laut MEDLINE: Gait Analysis, Pressure, Walking. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Smart insoles equipped with pressure sensor matrices are increasingly used for gait analysis, yet high-density arrays compromise battery life and data throughput. This study aims to identify the optimal sparse sensor layout required to accurately estimate the Center of Pressure (CoP) by analyzing the trade-off between sensor number, spatial placement, and reconstruction error. Plantar pressure data were collected from twelve healthy participants walking at a self-selected speed using 16-sensor connected insoles. A combinatorial algorithm evaluated all 216−1 possible sensor combinations to minimize the Root Mean Square Error (RMSE) in the antero-posterior, medio-lateral, and global Euclidean directions. Results reveal a non-linear convergence of accuracy that depends on the spatial axis. For longitudinal and global progression, a clear inflection point achieving sub-centimetric accuracy (RMSE < 5 mm) is reached at seven sensors. In contrast, medio-lateral tracking shows its largest discrete error reduction at five sensors, followed by gradual improvements at higher densities. Anatomical frequency analysis highlights distinct spatial requirements: the posterior heel is consistently selected for medio-lateral accuracy, while the lateral arch and metatarsal regions are critical for longitudinal progression. These findings suggest that while a minimum of seven strategically placed sensors enables robust CoP tracking across all spatial axes, optimal hardware design should remain task-specific. This work provides a data-driven framework for the development of energy-efficient wearable gait monitoring systems.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Gait AnalysisPressureWalkingAdultFemaleHumansAlgorithmsBiomechanical PhenomenaFootGaitMaleYoung AdultMiddle Aged

Stichwörter der Autor:innen

center of pressuregait analysisplantar pressuresensor optimizationsmart insolessparse sensingwearable sensors

Autor:innen und Institutionen

  • Centre de Nanosciences et de Nanotechnologies, Centre National de la Recherche Scientifique, Université Paris-Saclay, 91120 Palaiseau, France.

ORCID-Profile: Matthis Gautier, Fabien Parrain, Pierre-Yves Joubert

Zitieren

APA

Gautier, M., Parrain, F., & Joubert, P. Y. (2026). Optimizing Sensor Number and Placement for Accurate and Robust Center of Pressure Estimation on Instrumented Insoles. Sensors, 26(9), 2723. https://doi.org/10.3390/s26092723

Vancouver

Gautier M, Parrain F, Joubert PY. Optimizing Sensor Number and Placement for Accurate and Robust Center of Pressure Estimation on Instrumented Insoles. Sensors. 2026;26(9):2723. doi:10.3390/s26092723

BibTeX
@article{Gautier2026,
  author = {Gautier, Matthis and Parrain, Fabien and Joubert, Pierre-Yves},
  title = {Optimizing Sensor Number and Placement for Accurate and Robust Center of Pressure Estimation on Instrumented Insoles},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {9},
  pages = {2723},
  doi = {10.3390/s26092723}
}
Kostenlos starten →