EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Improving Communication Capacity in mmWave Backhaul UAV Networks

Taisei Sugimoto iD, Gia Khanh Tran iD

Sensors · 27.04.2026 · 26 (9) · 2700

DOI: 10.3390/s26092700 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 27.04.2026. Verfasst von Taisei Sugimoto und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic Engineering, Institute of Science Tokyo, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550, Japan. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: JSPS KAKENHI.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Millimeter-wave (mmWave) unmanned aerial vehicle (UAV) networks are a promising solution for rapidly deployable backhaul systems in urban disaster scenarios, where terrestrial infrastructure may become unavailable. Although mmWave bands provide wide bandwidth for high-capacity transmission, their strong susceptibility to blockage and beam misalignment poses significant challenges in dense urban environments, particularly under UAV positional fluctuations caused by wind. This study investigates the optimization of multi-hop mmWave UAV backhaul networks with the objective of maximizing the bottleneck link capacity. A three-dimensional urban model of the Shinjuku area in Tokyo is employed, and radio propagation is evaluated using a ray-tracing-based approach considering line-of-sight (LoS) constraints and inter-link interference. Particle Swarm Optimization (PSO) is used to determine optimal UAV placements for two- to four-hop configurations. Numerical results demonstrate that multi-hop relaying combined with directional 2 × 2 patch antennas significantly improves the minimum link capacity, enabling the target backhaul capacity of approximately 9 Gbps per link under static conditions. However, capacity degradation is observed when UAV jitter is introduced due to LoS blockage and beam misalignment. To address this issue, a jitter-aware optimization method incorporating an expanded Fresnel-zone constraint is proposed. The proposed method substantially mitigates capacity degradation under realistic positional fluctuations, resulting in more robust backhaul performance. These findings demonstrate that jitter-aware placement design is essential for realizing reliable high-capacity mmWave UAV backhaul networks in dense urban disaster environments.

Schlagwörter

Stichwörter der Autor:innen

LoSPSOSINRUAVbackhaulfresnel zonemmWaveoptimizationresiliency

Autor:innen und Institutionen

  • Department of Electronic Engineering, Institute of Science Tokyo, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550, Japan.

ORCID-Profile: Taisei Sugimoto, Gia Khanh Tran

Förderung

  • JSPS KAKENHI

Zitieren

APA

Sugimoto, T., & Tran, G. K. (2026). Research on Improving Communication Capacity in mmWave Backhaul UAV Networks. Sensors, 26(9), 2700. https://doi.org/10.3390/s26092700

Vancouver

Sugimoto T, Tran GK. Research on Improving Communication Capacity in mmWave Backhaul UAV Networks. Sensors. 2026;26(9):2700. doi:10.3390/s26092700

BibTeX
@article{Sugimoto2026,
  author = {Sugimoto, Taisei and Tran, Gia Khanh},
  title = {Research on Improving Communication Capacity in mmWave Backhaul UAV Networks},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {9},
  pages = {2700},
  doi = {10.3390/s26092700}
}
Kostenlos starten →