Smart Wheelchair and Sensor System for Tracking Performance and Accessibility in Urban Environments
Sensors · 24.04.2026 · 26 (9) · 2657
DOI: 10.3390/s26092657 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 24.04.2026. Verfasst von Franz Konstantin Fuss und 3 weiteren Autor:innen. Beteiligte Einrichtung: Chair of Biomechanics, Faculty of Engineering Science, University of Bayreuth, D-95447 Bayreuth, Germany. Hauptthemen laut MEDLINE: Wheelchairs. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Swinburne University and Scope, SCOPE, Swinburne University.
Abstract (Originalsprache)
Wheelchair users face significant mobility limitations related to both medical issues (e.g., musculoskeletal strain, pressure ulcers) and urban accessibility challenges. This pilot study introduces a sensor system integrating an inertial measurement unit (IMU), GPS (Global Positioning System), and a pressure-measuring seat to monitor distance travelled, speed, and posture in relation to real-world conditions. Seven participants navigated an approximately 800-metre outdoor course, divided into 13 sections, while real-time data were recorded. The results showed an average speed of 1.24 ± 0.41 m/s with peak speeds of up to 2.67 m/s. The centre of pressure on the seat fluctuated by an average of 25 mm in the x and y directions (left-right: COPx, back-forward: COPy). The data for average speed, COPx, and COPy showed significant differences between most of the 13 sections, with large, very large, and huge effect sizes. Comparing the speed, COPx, and COPy data with respect to distance travelled, and correlating them between the seven participants by applying the rank-sum method to the mean R2 and calculating Kendall’s W, revealed that speed, COPx, and COPy were influenced by course conditions (R2 medians between 0.013 and 0.499; W = 0.7857, strong agreement; χ2p = 0.0281). Small R2 values indicate more individualised participant behaviour, while large R2 values highlight the stronger influence of course conditions on the parameters. This non-invasive and cost-effective system provides objective motion data that can be used for future research in wheelchair design and rehabilitation strategies. Despite its advantages, this study was limited to able-bodied participants, so further clinical trials with individuals with mobility impairments are needed.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chair of Biomechanics, Faculty of Engineering Science, University of Bayreuth, D-95447 Bayreuth, Germany.
- Division of Biomechatronics, Fraunhofer Institute for Manufacturing Engineering and Automation IPA, D-95447 Bayreuth, Germany.
- School of Health and Biomedical Sciences, RMIT University, Bundoora, VIC 3083, Australia.
- Department of Paediatrics, The University of Melbourne, Melbourne, VIC 3052, Australia.
- Murdoch Children's Research Institute (MCRI), Melbourne, VIC 3052, Australia.
ORCID-Profile: Franz Konstantin Fuss, Oren Tirosh, Yehuda Weizman
Förderung
- Swinburne University and Scope
- SCOPE
- Swinburne University
Zitieren
APA
Fuss, F. K., Tan, A. M., Tirosh, O., & Weizman, Y. (2026). Smart Wheelchair and Sensor System for Tracking Performance and Accessibility in Urban Environments. Sensors, 26(9), 2657. https://doi.org/10.3390/s26092657
Vancouver
Fuss FK, Tan AM, Tirosh O, Weizman Y. Smart Wheelchair and Sensor System for Tracking Performance and Accessibility in Urban Environments. Sensors. 2026;26(9):2657. doi:10.3390/s26092657
BibTeX
@article{Fuss2026,
author = {Fuss, Franz Konstantin and Tan, Adin Ming and Tirosh, Oren and Weizman, Yehuda},
title = {Smart Wheelchair and Sensor System for Tracking Performance and Accessibility in Urban Environments},
journal = {Sensors},
year = {2026},
volume = {26},
number = {9},
pages = {2657},
doi = {10.3390/s26092657}
}
EUVIMED