EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

FPGA Implementation of a Radar-Based Fall Detection System Using Binarized Convolutional Neural Networks

Hyeongwon Cho iD, Soongyu Kang iD, Yunho Jung iD

Sensors · 17.04.2026 · 26 (8) · 2469

DOI: 10.3390/s26082469 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 17.04.2026. Verfasst von Hyeongwon Cho und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Smart Air Mobility, Korea Aerospace University, Goyang 10540, Republic of Korea. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy (MOTIE, Korea), IDEC.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As the number of elderly individuals living alone increases, the risk of fall-related accidents correspondingly rises, underscoring the need for rapid fall detection systems. Because falls are difficult to predict in terms of location, detection systems must be deployed in a distributed manner, which in turn requires compact and low-power implementations. Unlike camera sensors, radar sensors do not raise privacy concerns and are not limited by line-of-sight constraints. Moreover, compared with wearable sensors, radar enables continuous monitoring without user intervention. However, prior radar-based approaches incur high computational complexity, leading to increased power consumption and larger hardware area, thereby necessitating efficient hardware design. This paper proposes a lightweight fall detection system based on continuous-wave (CW) radar and a binarized convolutional neural network (BCNN). Radar signals are preprocessed using short-time Fourier transform (STFT) to generate binary spectrograms, which are then fed into a BCNN-based classification network. The proposed system performs binary classification of five fall activities and seven non-fall activities with an accuracy of 96.1%. The preprocessing module and classification network were implemented as hardware accelerators and integrated with a microprocessor in a system-on-chip (SoC) architecture on a field-programmable gate array (FPGA). Compared with the software implementation, the proposed hardware achieved speedups of 387.5× and 86.7× for the preprocessing and classification modules, respectively. Furthermore, the overall system processing time was 2.58 ms, corresponding to an 89.5× speedup over the software baseline.

Schlagwörter

Stichwörter der Autor:innen

binarized convolutional neural network (BCNN)continuous-wave (CW) radarfall detectionfield-programmable gate array (FPGA)system-on-chip (SoC)

Autor:innen und Institutionen

  • Department of Smart Air Mobility, Korea Aerospace University, Goyang 10540, Republic of Korea.
  • School of Electronics and Information Engineering, Korea Aerospace University, Goyang 10540, Republic of Korea.

ORCID-Profile: Hyeongwon Cho, Soongyu Kang, Yunho Jung

Förderung

  • Ministry of Trade, Industry and Energy (MOTIE, Korea)
  • IDEC

Zitieren

APA

Cho, H., Kang, S., & Jung, Y. (2026). FPGA Implementation of a Radar-Based Fall Detection System Using Binarized Convolutional Neural Networks. Sensors, 26(8), 2469. https://doi.org/10.3390/s26082469

Vancouver

Cho H, Kang S, Jung Y. FPGA Implementation of a Radar-Based Fall Detection System Using Binarized Convolutional Neural Networks. Sensors. 2026;26(8):2469. doi:10.3390/s26082469

BibTeX
@article{Cho2026,
  author = {Cho, Hyeongwon and Kang, Soongyu and Jung, Yunho},
  title = {FPGA Implementation of a Radar-Based Fall Detection System Using Binarized Convolutional Neural Networks},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {8},
  pages = {2469},
  doi = {10.3390/s26082469}
}
Kostenlos starten →