EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Navigation Method for Subsea Drilling Robot Based on Inertial Navigation and Odometry

Yingjie Liu, Peng Zhou, Feng Xiao, Chenyang Li, Junhui Li, Jiawang Chen iD, Ziqiang Ren

Sensors · 16.04.2026 · 26 (8) · 2457

DOI: 10.3390/s26082457 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 16.04.2026. Verfasst von Yingjie Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Hangzhou Universal Control Mechatronical Engineering LLC, Hangzhou 310005, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Natural Resources of Guangdong Province, Marine Economy Development Special Fund (Six Major Marine Industries) Project, Department of Natural Resources of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes a robust navigation method based on a robust square-root cubature Kalman filter (RSRCKF) to address the accuracy divergence of integrated navigation systems caused by drilling-induced slippage and the mismatch between the tail-cable encoder and the robot motion during operations of a seafloor drilling robot in deep-sea soft sedimentary layers. Considering the large-deformation mechanical characteristics of the seabed under drilling conditions, a unified state-space model incorporating a time-varying odometer scale-factor error is first established. To alleviate the numerical instability of the nonlinear system in the presence of non-Gaussian noise, a square-root cubature Kalman filter (SRCKF) framework is employed, in which the positive definiteness of the error covariance matrix is dynamically preserved via QR decomposition. Subsequently, an online fault detection mechanism based on a modified chi-square test is developed. By introducing a two-segment IGG (a classical robust weighting scheme) weighting function, an adaptive variance inflation factor is constructed to enable real-time identification and down-weighting of abnormal observations induced by slippage. Field experiments, including drilling and turning tests conducted on tidal mudflats off the coast of Zhoushan, demonstrate that the proposed method can effectively mitigate the impact of “false displacement” disturbances caused by typical soft clay slippage conditions through enhanced statistical robustness. Taking the conventional SINS/OD integration scheme as the baseline, the proposed method achieves an approximate 82.4% reduction in positioning error. These results verify the robustness and engineering applicability of the proposed algorithm in complex seabed environments.

Schlagwörter

Stichwörter der Autor:innen

integrated navigationnon-Gaussian noiserobust square-root cubature Kalman filterslippage compensationsubsea drilling robot

Autor:innen und Institutionen

  • Hangzhou Universal Control Mechatronical Engineering LLC, Hangzhou 310005, China.
  • Donghai Laboratory, Zhejiang University, Zhoushan 316021, China.
  • Ocean College, Zhejiang University, Zhoushan 316021, China.
  • Hainan Institute, Zhejiang University, Sanya 572000, China.

ORCID-Profile: Jiawang Chen

Förderung

  • Department of Natural Resources of Guangdong Province
  • Marine Economy Development Special Fund (Six Major Marine Industries) Project, Department of Natural Resources of Guangdong Province

Zitieren

APA

Liu, Y., Zhou, P., Xiao, F., Li, C., Li, J., Chen, J., & Ren, Z. (2026). Research on Navigation Method for Subsea Drilling Robot Based on Inertial Navigation and Odometry. Sensors, 26(8), 2457. https://doi.org/10.3390/s26082457

Vancouver

Liu Y, Zhou P, Xiao F, Li C, Li J, Chen J, et al. Research on Navigation Method for Subsea Drilling Robot Based on Inertial Navigation and Odometry. Sensors. 2026;26(8):2457. doi:10.3390/s26082457

BibTeX
@article{Liu2026,
  author = {Liu, Yingjie and Zhou, Peng and Xiao, Feng and Li, Chenyang and Li, Junhui and Chen, Jiawang and Ren, Ziqiang},
  title = {Research on Navigation Method for Subsea Drilling Robot Based on Inertial Navigation and Odometry},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {8},
  pages = {2457},
  doi = {10.3390/s26082457}
}
Kostenlos starten →