Novel Robotic Test Rig for Camshaft Geometry Measurement with a Collaborative Robot
Sensors · 02.04.2026 · 26 (7) · 2206
DOI: 10.3390/s26072206 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 02.04.2026. Verfasst von Agnieszka Sękala und 8 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper presents the design and experimental validation of an innovative robotic test stand for measuring camshaft cam geometry, intended to support preventive quality control in high-volume production. The proposed solution integrates a collaborative robot with a dedicated measurement setup to enable repeatable positioning of the inspected camshaft and automated acquisition of geometric features critical for functional performance. A complete measurement methodology was developed, including the measurement sequence, data acquisition procedure, and processing of the recorded signals to determine key cam geometry parameters. To verify the reliability of the proposed approach, measurement results obtained using the robotic stand were compared with reference data acquired using conventional metrology tools and standard inspection procedures. Experimental studies confirmed that the developed stand provides repeatable measurement results, enabling the stable identification of the examined geometric features across repeated trials. Moreover, a high level of agreement was observed between the measurement data obtained using the proposed method and the reference measurements, demonstrating the suitability of the cobot-based test stand for preventive quality control applications in industrial environments. The concept presented offers a scalable and flexible alternative to manual inspection and dedicated special-purpose gauges, with potential benefits in terms of inspection throughput and standardization of quality control workflows. The novelty of the approach lies in the indirect ultrasonic measurement model combined with a quadrant-based sensor orientation strategy and repeatable 90° camshaft indexing, enabling full-profile acquisition within the robot workspace.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland.
- Autorobotics Sp. z o.o., ul. Kozielska 16, 47-400 Racibórz, Poland.
- IT Department, Zealand-University of Applied Sciences, Lyngvej 21, 4600 Køge, Denmark.
ORCID-Profile: Tomasz Blaszczyk, Krzysztof Foit, Gabriel Kost, Maciej Kaźmierczak, Wojciech Jamrozik
Zitieren
APA
Sękala, A., Królicki, J., Blaszczyk, T., Ociepka, P., Foit, K., Kost, G., Kaźmierczak, M., Gołda, G., & Jamrozik, W. (2026). Novel Robotic Test Rig for Camshaft Geometry Measurement with a Collaborative Robot. Sensors, 26(7), 2206. https://doi.org/10.3390/s26072206
Vancouver
Sękala A, Królicki J, Blaszczyk T, Ociepka P, Foit K, Kost G, et al. Novel Robotic Test Rig for Camshaft Geometry Measurement with a Collaborative Robot. Sensors. 2026;26(7):2206. doi:10.3390/s26072206
BibTeX
@article{Skala2026,
author = {Sękala, Agnieszka and Królicki, Jacek and Blaszczyk, Tomasz and Ociepka, Piotr and Foit, Krzysztof and Kost, Gabriel and Kaźmierczak, Maciej and Gołda, Grzegorz and Jamrozik, Wojciech},
title = {Novel Robotic Test Rig for Camshaft Geometry Measurement with a Collaborative Robot},
journal = {Sensors},
year = {2026},
volume = {26},
number = {7},
pages = {2206},
doi = {10.3390/s26072206}
}
EUVIMED