Multi-Channel Vibration Signal Analysis for Flexible Bearing Fault Diagnosis of Industrial Robot Harmonic Drives
Sensors · 30.03.2026 · 26 (7) · 2134
DOI: 10.3390/s26072134 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 30.03.2026. Verfasst von Rongzhou Lin und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In industrial robots, harmonic drive flexible bearings are prone to faults, and fault diagnosis is essential for preventing unexpected downtime. However, vibration signals acquired from robot joints are often non-stationary and contaminated by strong multi-source interference, including motion-induced interference and vibrations induced by the deformation of flexible components. Such interference severely masks the subtle signatures of faults. To address this issue, this paper proposes a fault diagnosis framework that leverages multi-channel vibration signals to enhance fault-related features. First, angular resampling is applied to eliminate speed-induced non-stationarity. Second, envelope extraction is utilized to obtain demodulated signals suitable for independent component analysis (ICA). Subsequently, ICA is employed to extract fault-related components from the multi-channel signals. Finally, the fault-related independent component is identified and analyzed via envelope order spectrum analysis. Experimental validation on an industrial robot under both single-joint and multi-joint operating conditions demonstrates the effectiveness of the proposed framework. The method suppresses multi-source interference and achieves accurate fault diagnosis for flexible bearings under complex operating conditions, with quantitative validation confirming the diagnostic performance of the proposed framework.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China.
- China North Vehicle Research Institute, Beijing 100072, China.
Zitieren
APA
Lin, R., Duan, X., & Gao, T. (2026). Multi-Channel Vibration Signal Analysis for Flexible Bearing Fault Diagnosis of Industrial Robot Harmonic Drives. Sensors, 26(7), 2134. https://doi.org/10.3390/s26072134
Vancouver
Lin R, Duan X, Gao T. Multi-Channel Vibration Signal Analysis for Flexible Bearing Fault Diagnosis of Industrial Robot Harmonic Drives. Sensors. 2026;26(7):2134. doi:10.3390/s26072134
BibTeX
@article{Lin2026,
author = {Lin, Rongzhou and Duan, Xiaohui and Gao, Tongxin},
title = {Multi-Channel Vibration Signal Analysis for Flexible Bearing Fault Diagnosis of Industrial Robot Harmonic Drives},
journal = {Sensors},
year = {2026},
volume = {26},
number = {7},
pages = {2134},
doi = {10.3390/s26072134}
}
EUVIMED