EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Vision-Guided Adaptive 3D Ultrasonic Scanning for Robotic Arms: Nondestructive Testing of Aerospace Components

Xiaolong Wei, Zijian Kang, Yizhen Yin, Jingtao Zhang, Caizhi Li, Yu Cai, Weifeng He iD

Sensors · 30.03.2026 · 26 (7) · 2129

DOI: 10.3390/s26072129 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 30.03.2026. Verfasst von Xiaolong Wei und 6 weiteren Autor:innen. Beteiligte Einrichtung: National Key Lab of Aerospace Power System and Plasma Technology, Air Force Engineering University, Xi'an 710038, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Plan of China, Major Research Plan of the National Natural Science Foundation of China, National Science and Technology Major Project of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In view of the bottleneck problems existing in the 3D ultrasonic testing of aircraft composite laminated structures—including heavy reliance on manual operation, resulting in low detection efficiency, and the inability of traditional robotic arms to adapt to the testing of complex curved surfaces due to their dependence on predefined fixed trajectories—this paper proposes an automated 3D ultrasonic testing method based on 3D vision guidance for robotic arms. Firstly, the proposed Yolo-Mask model is adopted to realize the visual recognition and segmentation of composite component regions, after which the segmentation results are mapped to the depth map and further converted into the surface point cloud of the material. Secondly, on the basis of point cloud preprocessing and trajectory point extraction, the automatic planning of the robotic arm’s scanning trajectory is achieved, which drives the robotic arm to perform precise motion and to synchronously collect spatial pose and ultrasonic testing data. Finally, 3D reconstruction is completed via a fusion algorithm, and 3D images of the material’s internal structures are generated. Experimental verification shows that the proposed method achieves a Segm-mAP of 97.4%, a detection speed of 11.7 fps, and a 3D imaging error of less than 0.1 mm, thereby realizing fully automated detection throughout the entire process. This research provides an effective solution for the non-destructive testing of aircraft composite structures.

Schlagwörter

Stichwörter der Autor:innen

3D ultrasonic testingaircraft compositedeep learninglaminated structurespoint cloud processingvision guidance

Autor:innen und Institutionen

  • National Key Lab of Aerospace Power System and Plasma Technology, Air Force Engineering University, Xi'an 710038, China.
  • Institute of Aero-Engine, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710038, China.

ORCID-Profile: Weifeng He

Förderung

  • National Key R&D Plan of China
  • Major Research Plan of the National Natural Science Foundation of China
  • National Science and Technology Major Project of China
  • National Natural Science Foundation of China https://ror.org/01h0zpd94

Zitieren

APA

Wei, X., Kang, Z., Yin, Y., Zhang, J., Li, C., Cai, Y., & He, W. (2026). 3D Vision-Guided Adaptive 3D Ultrasonic Scanning for Robotic Arms: Nondestructive Testing of Aerospace Components. Sensors, 26(7), 2129. https://doi.org/10.3390/s26072129

Vancouver

Wei X, Kang Z, Yin Y, Zhang J, Li C, Cai Y, et al. 3D Vision-Guided Adaptive 3D Ultrasonic Scanning for Robotic Arms: Nondestructive Testing of Aerospace Components. Sensors. 2026;26(7):2129. doi:10.3390/s26072129

BibTeX
@article{Wei2026,
  author = {Wei, Xiaolong and Kang, Zijian and Yin, Yizhen and Zhang, Jingtao and Li, Caizhi and Cai, Yu and He, Weifeng},
  title = {3D Vision-Guided Adaptive 3D Ultrasonic Scanning for Robotic Arms: Nondestructive Testing of Aerospace Components},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {7},
  pages = {2129},
  doi = {10.3390/s26072129}
}
Kostenlos starten →