Development of a Low-Cost Passive Strain Sensor for Bridge Structural Health Monitoring
Sensors · 21.03.2026 · 26 (6) · 1963
DOI: 10.3390/s26061963 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 21.03.2026. Verfasst von Hannah M Power und 1 weiteren Autor:innen. Beteiligte Einrichtung: Mott MacDonald, Newark, DE 19716, USA. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Pennsylvania State University Center for Integrated Asset Management for Multimodal Trans-portation Infrastructure Systems (CIAMTIS), University of Delaware, Pennsylvania State University Center for Integrated Asset Management for Multimodal Transportation Infrastructure Systems.
Abstract (Originalsprache)
Complex structural health monitoring (SHM) systems are rarely installed on typical bridges, likely because of an expected low return on investment; however, low-cost, passive sensors made from a retroreflective sheeting material (RRSM) offer an economical alternative for SHM of typical bridges. Most departments of transportation (DOTs) fabricate and maintain traffic signs made from RRSMs. By using a material familiar to DOTs, the technology transfer from signs to strain sensing is streamlined. This paper focuses on the development of a passive strain sensor made from an RRSM. A standard Type XI fluorescent yellow-green RRSM is tested in tension to establish the relationship between retroreflectivity (RR) and induced strain. Results show RR decreases linearly with increasing strain after an initial plateau of ~1000 × 10−6 m/m. To function as a strain sensor, the RRSM is pre-strained beyond the plateau. A production sensor is designed to attach to the tension face of a structural element for monitoring. Periodic RR measurements are used to estimate the likely maximum strain change at the sensor location. The sensor has the potential to provide a practical, low-cost, and easily implementable solution to improve the monitoring of typical bridges, enhancing their safety and longevity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mott MacDonald, Newark, DE 19716, USA.
- Department of Civil, Construction, and Environmental Engineering, University of Delaware, Newark, DE 19716, USA.
ORCID-Profile: Hannah M Power, Harry W Shenton
Förderung
- Pennsylvania State University Center for Integrated Asset Management for Multimodal Trans-portation Infrastructure Systems (CIAMTIS)
- University of Delaware
- Pennsylvania State University Center for Integrated Asset Management for Multimodal Transportation Infrastructure Systems
- University of Delaware Graduate College
Zitieren
APA
Power, H. M., & Shenton, H. W. (2026). Development of a Low-Cost Passive Strain Sensor for Bridge Structural Health Monitoring. Sensors, 26(6), 1963. https://doi.org/10.3390/s26061963
Vancouver
Power HM, Shenton HW. Development of a Low-Cost Passive Strain Sensor for Bridge Structural Health Monitoring. Sensors. 2026;26(6):1963. doi:10.3390/s26061963
BibTeX
@article{Power2026,
author = {Power, Hannah M and Shenton, Harry W},
title = {Development of a Low-Cost Passive Strain Sensor for Bridge Structural Health Monitoring},
journal = {Sensors},
year = {2026},
volume = {26},
number = {6},
pages = {1963},
doi = {10.3390/s26061963}
}
EUVIMED