EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Deep Learning-Based Calibration of a Multi-Point Thin-Film Thermocouple Array for Temperature Field Measurement

Zewang Zhang, Shigui Gong, Jiajie Ye, Chengfei Zhang, Jun Chen, Zhixuan Su, Heng Wang, Zhichun Liu, Zhenyin Hai

Sensors · 20.03.2026 · 26 (6) · 1956

DOI: 10.3390/s26061956 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 20.03.2026. Verfasst von Zewang Zhang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Opto-Electronic and Communication Engineering, Xiamen University of Technology, Xiamen 361005, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zewang Zhang, Zhichun Liu, Fujian Provincial Joint Project on Science and Technology Innovation Strategy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multi-point array thin-film thermocouples have strong potential for high-precision, wide-range temperature monitoring in applications such as aircraft engine thermal condition assessment and industrial process control. However, conventional single-point thin-film thermocouples cannot satisfy the distributed measurement requirements of large-area temperature fields, and the accuracy of multi-point arrays is often degraded by coupling effects among sensing nodes, which hinders their engineering deployment. In this work, a multi-point array thin-film thermocouple is fabricated via precision welding, and an insulating layer is deposited on the sensor surface using electrospray atomization to establish a multi-point temperature-sensing hardware system. To compensate for coupling-induced deviations, a deep learning–based calibration method is developed: measurements from the array and reference thermocouples are synchronously collected to build the dataset, outliers are removed using the interquartile range (IQR) method, and a three-hidden-layer multilayer perceptron (MLP) is trained for each node independently using the Adam optimizer (learning rate 0.001) with an 8:2 train–test split. Performance is quantified by MAE, MSE, and R2, and the results show that the proposed approach markedly reduces measurement errors and improves the accuracy of the array thermocouples, demonstrating reliable performance and practical applicability for precise large-area temperature-field monitoring.

Schlagwörter

Stichwörter der Autor:innen

deep learningmulti-point array thermocouplemultilayer perceptrontemperature field monitoring

Autor:innen und Institutionen

  • School of Opto-Electronic and Communication Engineering, Xiamen University of Technology, Xiamen 361005, China.
  • Inner Mongolia Aerospace Power Machinery Testing Institute, Hohhot 010076, China.
  • School of Electronic Engineering, Ocean University of China, Qingdao 266100, China.
  • School of Aerospace Engineering, Xiamen University, Xiamen 361005, China.

Förderung

  • Zewang Zhang
  • Zhichun Liu
  • Fujian Provincial Joint Project on Science and Technology Innovation Strategy
  • Fujian Provincial Natural Science Foundation of China
  • National Natural Science Foundation of China

Zitieren

APA

Zhang, Z., Gong, S., Ye, J., Zhang, C., Chen, J., Su, Z., Wang, H., Liu, Z., & Hai, Z. (2026). Deep Learning-Based Calibration of a Multi-Point Thin-Film Thermocouple Array for Temperature Field Measurement. Sensors, 26(6), 1956. https://doi.org/10.3390/s26061956

Vancouver

Zhang Z, Gong S, Ye J, Zhang C, Chen J, Su Z, et al. Deep Learning-Based Calibration of a Multi-Point Thin-Film Thermocouple Array for Temperature Field Measurement. Sensors. 2026;26(6):1956. doi:10.3390/s26061956

BibTeX
@article{Zhang2026,
  author = {Zhang, Zewang and Gong, Shigui and Ye, Jiajie and Zhang, Chengfei and Chen, Jun and Su, Zhixuan and Wang, Heng and Liu, Zhichun and Hai, Zhenyin},
  title = {Deep Learning-Based Calibration of a Multi-Point Thin-Film Thermocouple Array for Temperature Field Measurement},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {6},
  pages = {1956},
  doi = {10.3390/s26061956}
}
Kostenlos starten →