EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Nonlinear Transform-Based Variability Index CFAR Detector for Doppler-Extended Targets

Lin Cao iD, Yuxin He iD, Zongmin Zhao iD, Chong Fu iD, Dongfeng Wang iD

Sensors · 19.03.2026 · 26 (6) · 1931

DOI: 10.3390/s26061931 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 19.03.2026. Verfasst von Lin Cao und 4 weiteren Autor:innen. Beteiligte Einrichtung: Center for Target Cognition Information Processing Science and Technology, Beijing Information Science and Technology University, Beijing 100101, Chi…. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Beijing Municipal Science and Technology Program, the National Science Foundation of China, the Beijing Education Commission Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In frequency-modulated continuous-wave (FMCW) radar systems, the detection of Doppler-extended targets (DETs) is a critical challenge. The micro-Doppler effects induced by the motion of extended targets such as pedestrians cause the echo energy to spread along the Doppler dimension. As a result, a single range-Doppler cell is unlikely to form a pronounced amplitude peak above the background noise level. Consequently, existing constant false alarm rate (CFAR) methods that rely on single-cell amplitude decisions tend to suffer from performance degradation in DET scenarios and exhibit limited adaptability under varying clutter conditions. To solve these issues, we propose a nonlinear transform–based variability index CFAR detector for DET (DET-NTVI-CFAR), with the aim of improving detection probability and maintaining stable false alarm control in complex clutter backgrounds. This work constructs a detection statistic by applying a nonlinear transform to the accumulated power cells and derives the threshold from the corresponding probability distribution model. A variability index CFAR (VI-CFAR) decision strategy is introduced to select the appropriate detection branch under different operating conditions. In the threshold design stage, the false alarm probability expressions of three sub-detection methods are derived to guide the selection of threshold parameters. Simulation results demonstrate that the proposed method achieves stable false alarm control and improves detection probability in various environments. Field test results also confirm the applicability of the DET-NTVI-CFAR detector.

Schlagwörter

Stichwörter der Autor:innen

Doppler-extended target (DET)constant false alarm rate (CFAR) detectorfrequency-modulated continuous-wave (FMCW) radarrange-Doppler matrix (RDM)

Autor:innen und Institutionen

  • Center for Target Cognition Information Processing Science and Technology, Beijing Information Science and Technology University, Beijing 100101, China.
  • School of Information and Communication Engineering, Beijing Information Science and Technology University, Beijing 100101, China.
  • School of Computer Science and Engineering, Northeastern University, Shenyang 110169, China.
  • Beijing TransMicrowave Technology Company, Beijing 100192, China.

ORCID-Profile: Lin Cao, Yuxin He, Zongmin Zhao, Chong Fu, Dongfeng Wang

Förderung

  • the Beijing Municipal Science and Technology Program
  • the National Science Foundation of China
  • the Beijing Education Commission Project

Zitieren

APA

Cao, L., He, Y., Zhao, Z., Fu, C., & Wang, D. (2026). A Nonlinear Transform-Based Variability Index CFAR Detector for Doppler-Extended Targets. Sensors, 26(6), 1931. https://doi.org/10.3390/s26061931

Vancouver

Cao L, He Y, Zhao Z, Fu C, Wang D. A Nonlinear Transform-Based Variability Index CFAR Detector for Doppler-Extended Targets. Sensors. 2026;26(6):1931. doi:10.3390/s26061931

BibTeX
@article{Cao2026,
  author = {Cao, Lin and He, Yuxin and Zhao, Zongmin and Fu, Chong and Wang, Dongfeng},
  title = {A Nonlinear Transform-Based Variability Index CFAR Detector for Doppler-Extended Targets},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {6},
  pages = {1931},
  doi = {10.3390/s26061931}
}
Kostenlos starten →