EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Precision Time Synchronization and Autonomous Maintenance for LEO Satellite Constellations Based on High-Stability Crystal Oscillators

Lei Mu iD, Xiaogong Hu, Mengjie Wu, Jin Li iD

Sensors · 14.03.2026 · 26 (6) · 1839

DOI: 10.3390/s26061839 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 14.03.2026. Verfasst von Lei Mu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Shanghai Astronomical Observatory, Chinese Academy of Sciences, Shanghai 200030, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, the large-scale deployment of Low Earth Orbit (LEO) constellations has made autonomous time synchronization and reference maintenance within constellations a critical enabling technology. Achieving high-precision synchronization with low cost and low power consumption, without relying on onboard atomic clocks or Global Navigation Satellite System (GNSS) signals, remains a significant challenge. This paper proposes an autonomous time synchronization method for LEO constellations that relies solely on high-stability crystal oscillators as local oscillators. By leveraging satellite-to-ground and inter-satellite measurement links, the proposed approach enables constellation-wide time synchronization without external timing references. A satellite-to-ground link visibility time model is established based on orbital parameters and ground station visibility geometry. On this basis, a discrete state-space model is constructed, incorporating temperature-induced frequency perturbation compensation, frequency offset estimation, and control voltage regulation. A combined Kalman filtering and Linear Quadratic Regulator (LQR) control framework is employed to achieve precise time offset synchronization and long-term maintenance. Experimental results demonstrate that, under a Walker-Delta constellation configuration with an orbital altitude of 800 km and an inclination of 55°, the proposed method introduces a time synchronization performance better than 5 ns (1σ), with a peak-to-peak error below 30 ns. This level of performance satisfies the timing requirements of typical LEO constellation applications, including communication scheduling, high-rate modulation, and critical infrastructure timing services. Moreover, the proposed scheme supports decentralized deployment and provides local physical time signal outputs, making it well suited for large-scale satellite networks requiring high-precision autonomous time synchronization.

Schlagwörter

Stichwörter der Autor:innen

Kalman filteringLEO satellite time synchronizationautonomous timekeepingfrequency drift predictiontemperature sensor compensation

Autor:innen und Institutionen

  • Shanghai Astronomical Observatory, Chinese Academy of Sciences, Shanghai 200030, China.
  • School of Astronomy and Space Science, University of Chinese Academy of Sciences, Beijing 100049, China.

ORCID-Profile: Lei Mu, Jin Li

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Mu, L., Hu, X., Wu, M., & Li, J. (2026). High-Precision Time Synchronization and Autonomous Maintenance for LEO Satellite Constellations Based on High-Stability Crystal Oscillators. Sensors, 26(6), 1839. https://doi.org/10.3390/s26061839

Vancouver

Mu L, Hu X, Wu M, Li J. High-Precision Time Synchronization and Autonomous Maintenance for LEO Satellite Constellations Based on High-Stability Crystal Oscillators. Sensors. 2026;26(6):1839. doi:10.3390/s26061839

BibTeX
@article{Mu2026,
  author = {Mu, Lei and Hu, Xiaogong and Wu, Mengjie and Li, Jin},
  title = {High-Precision Time Synchronization and Autonomous Maintenance for LEO Satellite Constellations Based on High-Stability Crystal Oscillators},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {6},
  pages = {1839},
  doi = {10.3390/s26061839}
}
Kostenlos starten →