EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Research Progress of Electrically Conductive Asphalt Concrete Deicing and Snowmelt Technology: Material Development and Application Progress

Dong Liu, Jingnan Zhao iD, Mingli Lu, Zilong Wang, Jigun He

Sensors · 13.03.2026 · 26 (6) · 1831

DOI: 10.3390/s26061831 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 13.03.2026. Verfasst von Dong Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Guangxi Xinfazhan Communication Group Co., Ltd., Nanning 530004, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 214 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Xinfazhan Communications Group Co., Ltd., Key Science and Technology Project of Guangxi Transportation Industry, Guangxi Transportation Science and Technology Achievement Promotion Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Snow accumulation and ice formation can significantly reduce pavement friction, posing a serious threat to traffic safety during winter. Traditional snow-removal methods, including mechanical removal, chemical de-icing agents, and heated pavement systems, suffer from several limitations such as low efficiency, environmental impacts, and high operational costs. Electrically conductive asphalt concrete (ECAC) has therefore emerged as a promising active snow-melting technology. When an electric current passes through the conductive network formed within the asphalt mixture, heat is generated through the Joule heating effect. After incorporating conductive fillers, the electrical resistivity of ECAC mixtures can be reduced from approximately 106–108 Ω·cm for conventional asphalt mixtures to about 10−1–102 Ω·cm. Under an applied voltage typically ranging from 30 to 60 V, ECAC pavements can increase the surface temperature by 10–30 °C within 10–30 min, thereby enabling rapid snow melting and ice removal. Meanwhile, an optimized conductive network can maintain sufficient mechanical performance, with dynamic stability generally exceeding 3000 cycles/mm. When the conductive filler content is reasonably controlled, only a limited reduction in fatigue resistance is observed. This paper presents a comprehensive review of electrically conductive asphalt concrete technologies for snow-melting pavements. The background, underlying mechanisms, material development, system configuration, and field applications of ECAC are systematically summarized. Finally, the current challenges are discussed, including the stability of conductive networks, the trade-off between electrical conductivity and pavement performance, and electrical safety. Future research directions focusing on material optimization, intelligent power control, and long-term field performance evaluation are proposed to support the practical application of ECAC pavements in sustainable winter road maintenance.

Schlagwörter

Stichwörter der Autor:innen

ECACJoule heating effectconductive fillersde-icing and snow meltingintelligent transportation systems

Autor:innen und Institutionen

  • Guangxi Xinfazhan Communication Group Co., Ltd., Nanning 530004, China.
  • School of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China.
  • Guangxi Transportation Science and Technology Group Co., Ltd., Nanning 530004, China.
  • Guangxi Transportation Construction Engineering Group Co., Ltd., Nanning 530004, China.

ORCID-Profile: Jingnan Zhao

Förderung

  • Guangxi Xinfazhan Communications Group Co., Ltd.
  • Key Science and Technology Project of Guangxi Transportation Industry
  • Guangxi Transportation Science and Technology Achievement Promotion Project
  • Guangxi Transportation Industry Intelligent Inspection & Data Application R&D Center

Zitieren

APA

Liu, D., Zhao, J., Lu, M., Wang, Z., & He, J. (2026). Research Progress of Electrically Conductive Asphalt Concrete Deicing and Snowmelt Technology: Material Development and Application Progress. Sensors, 26(6), 1831. https://doi.org/10.3390/s26061831

Vancouver

Liu D, Zhao J, Lu M, Wang Z, He J. Research Progress of Electrically Conductive Asphalt Concrete Deicing and Snowmelt Technology: Material Development and Application Progress. Sensors. 2026;26(6):1831. doi:10.3390/s26061831

BibTeX
@article{Liu2026,
  author = {Liu, Dong and Zhao, Jingnan and Lu, Mingli and Wang, Zilong and He, Jigun},
  title = {Research Progress of Electrically Conductive Asphalt Concrete Deicing and Snowmelt Technology: Material Development and Application Progress},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {6},
  pages = {1831},
  doi = {10.3390/s26061831}
}
Kostenlos starten →