EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Magnetic Induction Sensing of Corrosion on Steel Pipes: Feasibility, Instrument Design and First Test Results

Verena Schifano, Guy Marquis iD, Pierre-Daniel Matthey, Martin G Luling iD, Hamza K Bennani, Luigi Kassir, Maher Kassir

Sensors · 05.03.2026 · 26 (5) · 1630

DOI: 10.3390/s26051630 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 05.03.2026. Verfasst von Verena Schifano und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institut Terre et Environnement de Strasbourg, UMR 7063 CNRS/Université de Strasbourg/ENGEES, 67084 Strasbourg, France. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Underground steel pipes are an essential component of the water and energy supply chains, and assessing their damage with standard techniques implies a temporary interruption in their use, often at a high cost to the operators. Evaluating the damage outside of the pipe would minimize these interruptions. In this work, we propose a new approach to investigating corrosion by taking advantage of the reduction in the steel’s magnetic permeability resulting from it. To enhance these variations, the pipe is excited by a static magnetic field produced by a rectangular loop, inducing magnetization in the pipe that will be weaker where corrosion is present. The secondary magnetic fields produced by this magnetization are measured using an array of triaxial magnetic sensors. A desktop study using finite-element modelling confirmed the feasibility of the approach and informed the design of a first prototype. Scans of test pipes over a custom measurement bench show that corroded zones, as well as welding joints, generate significant anomalies with a strong signal-to-noise ratio, easily identified using simple signal processing techniques. These results confirm the viability of this non-invasive magnetostatic methodology.

Schlagwörter

Stichwörter der Autor:innen

corrosionmagnetic inductionnon-invasive techniques

Autor:innen und Institutionen

  • Institut Terre et Environnement de Strasbourg, UMR 7063 CNRS/Université de Strasbourg/ENGEES, 67084 Strasbourg, France.
  • Enerex SAS, 67084 Strasbourg, France.
  • LulingTech SAS, 75019 Paris, France.
  • Skipper NDT, 75001 Paris, France.

ORCID-Profile: Guy Marquis, Martin G Luling

Zitieren

APA

Schifano, V., Marquis, G., Matthey, P. D., Luling, M. G., Bennani, H. K., Kassir, L., & Kassir, M. (2026). Magnetic Induction Sensing of Corrosion on Steel Pipes: Feasibility, Instrument Design and First Test Results. Sensors, 26(5), 1630. https://doi.org/10.3390/s26051630

Vancouver

Schifano V, Marquis G, Matthey PD, Luling MG, Bennani HK, Kassir L, et al. Magnetic Induction Sensing of Corrosion on Steel Pipes: Feasibility, Instrument Design and First Test Results. Sensors. 2026;26(5):1630. doi:10.3390/s26051630

BibTeX
@article{Schifano2026,
  author = {Schifano, Verena and Marquis, Guy and Matthey, Pierre-Daniel and Luling, Martin G and Bennani, Hamza K and Kassir, Luigi and Kassir, Maher},
  title = {Magnetic Induction Sensing of Corrosion on Steel Pipes: Feasibility, Instrument Design and First Test Results},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {5},
  pages = {1630},
  doi = {10.3390/s26051630}
}
Kostenlos starten →