EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Through-Hole Spiral Microstrip Resonator for Inline Dielectric Characterization of Liquids

Laura Arruzzoli iD, Giovanni Gugliandolo iD, Ester Zirilli, Mariangela Latino iD, Alessandro Pistone iD, Giovanni Crupi iD, Nicola Donato iD

Sensors · 01.03.2026 · 26 (5) · 1544

DOI: 10.3390/s26051544 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 01.03.2026. Verfasst von Laura Arruzzoli und 6 weiteren Autor:innen. Beteiligte Einrichtung: BIOMORF Department, University of Messina, 98125 Messina, Italy. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union (NextGeneration EU), MUR-PNRR project SAMOTHRACE, European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses the inline dielectric characterization of liquids using a prototype planar resonant sensor with two capacitively coupled spirals, fabricated by inkjet printing on a Rogers RO4003C substrate. The device includes a central hole designed to host a sample vial or a pipe, enabling contactless characterization of liquid solutions, including biological samples. Experimental validation includes stylus profilometry and optical microscopy to verify the thickness, uniformity, and continuity of the conductive film, as well as scattering parameter measurements in the frequency range from 3.5 GHz to 4.0 GHz. The frequency response exhibits two distinct resonances; the corresponding resonance parameters for each mode (resonant frequency fr, amplitude, and quality factor Q) were extracted through complex-domain fitting using Lorentzian profiles. The electrical characterization of the device was assessed as a function of the effective permittivity of water–ethanol test mixtures by varying the ethanol volume fraction. The proposed sensor showed a monotonic and nearly linear response to ethanol concentration, with frequency sensitivities of approximately 20 kHz/% and coefficients of determination up to R2=0.99.

Schlagwörter

Stichwörter der Autor:innen

biocompatible materialsdielectric characterizationin line liquid analysisinkjet printingmicrostrip resonatorsensors

Autor:innen und Institutionen

  • BIOMORF Department, University of Messina, 98125 Messina, Italy.
  • Department of Engineering, University of Messina, 98155 Messina, Italy.
  • National Research Council, Institute for Chemical-Physical Processes, 98158 Messina, Italy.

ORCID-Profile: Laura Arruzzoli, Giovanni Gugliandolo, Mariangela Latino, Alessandro Pistone, Giovanni Crupi, Nicola Donato

Förderung

  • European Union (NextGeneration EU), MUR-PNRR project SAMOTHRACE
  • European Union

Zitieren

APA

Arruzzoli, L., Gugliandolo, G., Zirilli, E., Latino, M., Pistone, A., Crupi, G., & Donato, N. (2026). Through-Hole Spiral Microstrip Resonator for Inline Dielectric Characterization of Liquids. Sensors, 26(5), 1544. https://doi.org/10.3390/s26051544

Vancouver

Arruzzoli L, Gugliandolo G, Zirilli E, Latino M, Pistone A, Crupi G, et al. Through-Hole Spiral Microstrip Resonator for Inline Dielectric Characterization of Liquids. Sensors. 2026;26(5):1544. doi:10.3390/s26051544

BibTeX
@article{Arruzzoli2026,
  author = {Arruzzoli, Laura and Gugliandolo, Giovanni and Zirilli, Ester and Latino, Mariangela and Pistone, Alessandro and Crupi, Giovanni and Donato, Nicola},
  title = {Through-Hole Spiral Microstrip Resonator for Inline Dielectric Characterization of Liquids},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {5},
  pages = {1544},
  doi = {10.3390/s26051544}
}
Kostenlos starten →