EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Kissing Bond Damage Identification and Evaluation in CFRP-Reinforced Steel Plates Using Mixed-Frequency Ultrasonic Guided Waves

Ruiqi Guan iD, Haifeng Li iD, Weilong Ni, Tansheng Huang, Kai Wang iD, Xue Han

Sensors · 28.02.2026 · 26 (5) · 1531

DOI: 10.3390/s26051531 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 28.02.2026. Verfasst von Ruiqi Guan und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Civil Engineering, Huaqiao University, Xiamen 361021, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Xiamen, China, Natural Science Foundation of Fujian Province, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CFRP laminates are widely adopted for the strengthening of steel structures and the debonding damage poses a severe threat to the integrity of CFRP-reinforced structures. However, as the early stage of debonding damage, kissing bond detection in these structures using the conventional ultrasonic guided waves method is a significant challenge due to the imperceptibility of microscale damage and the complexity of the wave properties at the interface. To address this problem, mixed-frequency ultrasonic guided waves with nonlinear characteristics are proposed to identify and evaluate kissing bond damage with different damage sizes in CFRP-reinforced steel structures. A finite element model is developed to simulate a kissing bond in a CFRP-reinforced steel plate and is utilized to investigate the interaction between mixed-frequency guided waves and the interface. Experimental tests are also carried out to verify the kissing bond detection method. Nonlinear parameters calculated based on the damage-induced sum and difference frequency components are employed to quantitatively evaluate the kissing bond damage. In addition, excitations with different wave modes are used in damage detection to compare their sensitivities to kissing bond damage. Both the simulation and experimental results reveal that the nonlinear parameter rises as the length of the kissing bond increases, reflecting the effectiveness of mixed-frequency ultrasonic guided wave for the identification and evaluation of kissing bond damage in CFRP-bonded structures.

Schlagwörter

Stichwörter der Autor:innen

CFRP-reinforced steel structureskissing bond damagemixed frequency responsenonlinear ultrasonic guided waves

Autor:innen und Institutionen

  • College of Civil Engineering, Huaqiao University, Xiamen 361021, China.
  • Xiamen Holsin Engineering Testing Co., Ltd., Xiamen 361027, China.
  • School of Aerospace Engineering, Xiamen University, Xiamen 361005, China.
  • School of Architecture and Civil Engineering, Xiamen Institute of Technology, Xiamen 361021, China.

ORCID-Profile: Ruiqi Guan, Haifeng Li, Kai Wang

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Xiamen, China
  • Natural Science Foundation of Fujian Province, China
  • Construction Technology Project of Xiamen Municipal Bureau of Construction, China

Zitieren

APA

Guan, R., Li, H., Ni, W., Huang, T., Wang, K., & Han, X. (2026). Kissing Bond Damage Identification and Evaluation in CFRP-Reinforced Steel Plates Using Mixed-Frequency Ultrasonic Guided Waves. Sensors, 26(5), 1531. https://doi.org/10.3390/s26051531

Vancouver

Guan R, Li H, Ni W, Huang T, Wang K, Han X. Kissing Bond Damage Identification and Evaluation in CFRP-Reinforced Steel Plates Using Mixed-Frequency Ultrasonic Guided Waves. Sensors. 2026;26(5):1531. doi:10.3390/s26051531

BibTeX
@article{Guan2026,
  author = {Guan, Ruiqi and Li, Haifeng and Ni, Weilong and Huang, Tansheng and Wang, Kai and Han, Xue},
  title = {Kissing Bond Damage Identification and Evaluation in CFRP-Reinforced Steel Plates Using Mixed-Frequency Ultrasonic Guided Waves},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {5},
  pages = {1531},
  doi = {10.3390/s26051531}
}
Kostenlos starten →