A Small-Sample Fault Diagnosis Method for High-Voltage Circuit Breaker Spring Mechanisms Based on Multi-Source Feature Fusion and Stacking Ensemble Learning
Sensors · 26.02.2026 · 26 (5) · 1485
DOI: 10.3390/s26051485 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 26.02.2026. Verfasst von Xining Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Grid Jiangsu Electric Power Research Institute, Nanjing 211103, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Science and Technology Project of State Grid Jiangsu Electric Power Company Limited.
Abstract (Originalsprache)
To address the practical engineering challenges of limited fault samples for high-voltage circuit breaker spring operating mechanisms and the inability of single features to fully reflect equipment status, this paper proposes a small-sample fault diagnosis method based on multi-source feature fusion and Stacking ensemble learning. First, a multi-source sensing system containing MEMS (Micro-Electro-Mechanical System) pressure and travel, coil, and motor current was constructed to achieve comprehensive monitoring of the mechanical and electrical states of a 220 kV circuit breaker; in particular, the introduction of non-invasive MEMS sensors effectively solves the difficulty of capturing static spring fatigue characteristics inherent in traditional methods. Second, a high-dimensional feature space was constructed using Savitzky–Golay filtering and physical feature extraction techniques. To address the characteristics of small-sample data distribution, a two-layer Stacking ensemble learning model based on 5-fold cross-validation was designed. This model utilizes the SVM (Support Vector Machine), RF (Random Forest), and KNN (K-Nearest Neighbors) as base classifiers and Logistic Regression as the meta-learner, achieving an adaptive fusion of the advantages of heterogeneous algorithms. True-type experimental results show that the average diagnostic accuracy of this method under normal conditions and four typical fault conditions reaches 96.1%, which is superior to single base models (the RF was 94.2%). Feature importance analysis further confirms that closing and opening pressures are the most critical features for distinguishing mechanical faults. This study provides effective theoretical basis and technical support for condition-based maintenance of high-voltage circuit breakers under small-sample conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Grid Jiangsu Electric Power Research Institute, Nanjing 211103, China.
- Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China.
ORCID-Profile: Hongwei Mei
Förderung
- the Science and Technology Project of State Grid Jiangsu Electric Power Company Limited
Zitieren
APA
Li, X., Xiao, H., Zhao, K., Sun, L., Zhuang, T., Zhang, H., & Mei, H. (2026). A Small-Sample Fault Diagnosis Method for High-Voltage Circuit Breaker Spring Mechanisms Based on Multi-Source Feature Fusion and Stacking Ensemble Learning. Sensors, 26(5), 1485. https://doi.org/10.3390/s26051485
Vancouver
Li X, Xiao H, Zhao K, Sun L, Zhuang T, Zhang H, et al. A Small-Sample Fault Diagnosis Method for High-Voltage Circuit Breaker Spring Mechanisms Based on Multi-Source Feature Fusion and Stacking Ensemble Learning. Sensors. 2026;26(5):1485. doi:10.3390/s26051485
BibTeX
@article{Li2026,
author = {Li, Xining and Xiao, Hanyan and Zhao, Ke and Sun, Lei and Zhuang, Tianxin and Zhang, Haoyan and Mei, Hongwei},
title = {A Small-Sample Fault Diagnosis Method for High-Voltage Circuit Breaker Spring Mechanisms Based on Multi-Source Feature Fusion and Stacking Ensemble Learning},
journal = {Sensors},
year = {2026},
volume = {26},
number = {5},
pages = {1485},
doi = {10.3390/s26051485}
}
EUVIMED