A MEMS Variable Reluctance Sensor for Contactless Detection of a Ferrous Rotating Target
Sensors · 16.02.2026 · 26 (4) · 1280
DOI: 10.3390/s26041280 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 16.02.2026. Verfasst von Dorra Nasr und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Information Engineering, University of Brescia, 25123 Brescia, Italy. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Italian Ministry of Foreign Affairs and International Cooperation.
Abstract (Originalsprache)
Variable reluctance sensors are widely adopted for robust and contactless detection of motion in harsh and space-constrained environments. This paper presents a MEMS-based variable reluctance induction sensor for the noncontact characterization of rotating ferromagnetic targets, based on a micromachined planar micro-coil coupled with an external permanent magnet. The rotation of a ferromagnetic object modulates the magnetic circuit reluctance, generating a voltage signal across the micro-coil that encodes information on the target rotational speed, proximity, and cross-sectional shape. Sensor operation is investigated through a lumped-element magnetic–electrical circuit model and finite-element magnetostatic simulations, quantifying the effects of target diameter, distance, and angular position on the linked magnetic flux. Experimental validation is performed using rotating drill bits as representative targets and a dedicated high-gain, high-input-impedance front-end circuit to amplify the induced voltage. Measured results at fixed rotation frequency show periodic voltage waveforms whose amplitude and shape vary consistently with target geometry, proximity and speed. Reliable detection is achieved for rotational speeds up to 1500 rpm, for drill bit diameters as small as 5 mm, and at sensor-to-target distances up to 8 mm. These results demonstrate the potential of MEMS variable reluctance induction sensors for compact speed sensing and target shape detection.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Information Engineering, University of Brescia, 25123 Brescia, Italy.
- Laboratory of Microelectronics and Instrumentation, Faculté des Sciences de Monastir, Université de Monastir, Monastir 5019, Tunisia.
- Centre for Research on Microelectronics and Nanotechnology of Sousse (CRMN), Technopole of Sousse B. P. 334, Sahloul, Sousse 4034, Tunisia.
- SMALL Group, ICTEAM Institute, UCLouvain, 1348 Louvain-la-Neuve, Belgium.
ORCID-Profile: Marco Baù, Alessandro Nastro, Stefano Bertelli, Marco Ferrari, Mohamed Hadj Said, Fares Tounsi, Vittorio Ferrari
Förderung
- Italian Ministry of Foreign Affairs and International Cooperation
Zitieren
APA
Nasr, D., Baù, M., Nastro, A., Bertelli, S., Ferrari, M., Said, M. H., Flandre, D., Mansour, M., Tounsi, F., & Ferrari, V. (2026). A MEMS Variable Reluctance Sensor for Contactless Detection of a Ferrous Rotating Target. Sensors, 26(4), 1280. https://doi.org/10.3390/s26041280
Vancouver
Nasr D, Baù M, Nastro A, Bertelli S, Ferrari M, Said MH, et al. A MEMS Variable Reluctance Sensor for Contactless Detection of a Ferrous Rotating Target. Sensors. 2026;26(4):1280. doi:10.3390/s26041280
BibTeX
@article{Nasr2026,
author = {Nasr, Dorra and Baù, Marco and Nastro, Alessandro and Bertelli, Stefano and Ferrari, Marco and Said, Mohamed Hadj and Flandre, Denis and Mansour, Mounir and Tounsi, Fares and Ferrari, Vittorio},
title = {A MEMS Variable Reluctance Sensor for Contactless Detection of a Ferrous Rotating Target},
journal = {Sensors},
year = {2026},
volume = {26},
number = {4},
pages = {1280},
doi = {10.3390/s26041280}
}
EUVIMED