EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Embedded Printing of Integrated Quantum Dot Waveguide Deformation Sensors

Tobias Biermann iD, Lennart Mesecke iD, Simon Teves iD, Gerrit Eckert, Ole Hill iD, Ivo Ziesche, Alexander Wolf iD, Roland Lachmayer iD

Sensors · 11.02.2026 · 26 (4) · 1160

DOI: 10.3390/s26041160 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 11.02.2026. Verfasst von Tobias Biermann und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Product Development, Leibniz University Hannover, An der Universität 1, 30823 Garbsen, Germany. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Research Foundation (DFG).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We present an optical deformation sensor additively manufactured via an embedded printing process that enables the direct integration of colloidal quantum dots into multimode silicone (PDMS) waveguides. The sensor consists of two parallel waveguide strands, one of which is locally functionalized with CdSe/CdS quantum dots serving as fluorescent emitters. When narrow-band UV light at 405 nm is coupled into the non-functionalized strand, structural deformation alters the conditions of total internal reflection, thereby changing the optical interaction between both strands. This leads to a deformation-dependent variation in the fluorescence shift-affected intensity ratio, which serves as a self-referenced signal for angle determination. Using ratiometric evaluation, angular deflections of up to 9.5° are detected with a resolution below 1° (2σ confidence), representing the performance of an initial functional prototype. The embedded printing process allows the voxel-wise adjustment of the material composition within a viscoplastic support medium and thus the spatially resolved integration of quantum dot-functionalized silicone. Attenuation losses of 0.81±0.02dB/cm at 625 nm confirm the optical suitability of the printed waveguides. This approach combines optical sensing and structural flexibility within a single manufacturing step and establishes a pathway toward fully integratable deformation-sensing elements for soft robotic and wearable systems.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingcondition monitoringembedded printingfluorescenceoptical deformation measurementquantum dotssoft robotics

Autor:innen und Institutionen

  • Institute of Product Development, Leibniz University Hannover, An der Universität 1, 30823 Garbsen, Germany.
  • Cluster of Excellence PhoenixD, Leibniz University Hannover, Welfengarten 1A, 30167 Hannover, Germany.
  • Institute of Physical Chemistry and Electrochemistry, Leibniz University Hannover, Callinstraße 3-3a, 30167 Hannover, Germany.
  • Laser Zentrum Hannover e.V., Hollerithallee 8, 30419 Hannover, Germany.
  • Deutsches Elektronen-Synchrotron, Platanenallee 6, 15738 Zeuthen, Germany.
  • Deutsches Zentrum für Astrophysik, Postplatz 1, 02826 Görlitz, Germany.

ORCID-Profile: Tobias Biermann, Lennart Mesecke, Simon Teves, Ole Hill, Alexander Wolf, Roland Lachmayer

Förderung

  • German Research Foundation (DFG)

Zitieren

APA

Biermann, T., Mesecke, L., Teves, S., Eckert, G., Hill, O., Ziesche, I., Wolf, A., & Lachmayer, R. (2026). Embedded Printing of Integrated Quantum Dot Waveguide Deformation Sensors. Sensors, 26(4), 1160. https://doi.org/10.3390/s26041160

Vancouver

Biermann T, Mesecke L, Teves S, Eckert G, Hill O, Ziesche I, et al. Embedded Printing of Integrated Quantum Dot Waveguide Deformation Sensors. Sensors. 2026;26(4):1160. doi:10.3390/s26041160

BibTeX
@article{Biermann2026,
  author = {Biermann, Tobias and Mesecke, Lennart and Teves, Simon and Eckert, Gerrit and Hill, Ole and Ziesche, Ivo and Wolf, Alexander and Lachmayer, Roland},
  title = {Embedded Printing of Integrated Quantum Dot Waveguide Deformation Sensors},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {4},
  pages = {1160},
  doi = {10.3390/s26041160}
}
Kostenlos starten →